RCA VR636HF User Manual Download

Page: 65 / 72

appendix: reference

Clock shows incorrect time or date

•

Power interruption. Automatic clock set was not turned on or did not work properly. Check time zone and daylight-
savings settings.

•

Make sure VCR or cable box is tuned to channel carrying XDS information.

•

Auto clock set is not supported by digital satellite receivers. Set the clock manually.

Time did not adjust for daylight-saving time

•

Check to make sure daylight-saving feature is set correctly.

VCR makes noise when stopped

•

VCR is removing tape from heads. This is normal. The head cylinder inside the VCR will continue to rotate for a few
minutes after you put the VCR in the stop mode.

Will not AUTO CHANNEL SEARCH active channels correctly

•

Check to make sure the antenna connections are secure and correct.

•

Check to make sure the Signal Type: CABLE/ANTENNA feature is set correctly.

•

If Detect Automatically was selected for the Signal Type in the AUTO CHANNEL SEARCH menu, try using either CABLE
TV or ANTENNA instead.

•

May not be necessary if using a cable box for all channels. Contact your local cable company for more information.

Tape plays back in slow motion

•

Press PLAY to return to normal playback.

Cannot select channels over 69

•

Cable channels over 69 can only be selected if Signal Type: CABLE/ANTENNA feature is set to CABLE.

Cassette with safety tab removed does not start to play automatically

•

Check to make sure the Auto Play ON/OFF feature is set to ON.

TIMER indicator flashes

•

Check to make sure there is a cassette in the VCR when a timer recording is set.

Time counter disappears during searching

•

This is normal.

On-screen menus appear in English, French, or Spanish

•

Check LANGUAGE feature.

Summary of Contents for VR636HF









































































Search results

Summary of Contents for VR636HF

Reviews:

Related manuals for VR636HF

Brands by name

Popular brands

RCA VR636HF, User Manual

Search results

Summary of Contents for VR636HF

Reviews:

Related manuals for VR636HF

Brands by name

Popular brands