RCA VR615HF User Manual Download

Page: 45 / 64

connections

Things to Know Before
Connecting Components

Protect Your Components from Power Surges

•

Connect all components before plugging any power
cords into the wall outlet.

•

Always turn off the TV and other components before
you connect or disconnect any cables.

Position Cables Correctly to Avoid Audio Hum or
Interference

•

Insert all cable plugs firmly into their jacks.

•

Place the audio/video cables to the sides of the TV’ s back
panel instead of straight down the middle after you
connect your components.

•

Try not to coil any twin-lead cables and keep them away
from the audio/video cables as much as possible.

•

Make sure all antennas and cables are properly
grounded. Refer to the Safety Tips sheet packed with
your unit.

Protect Your Components from Overheating

•

Do not block ventilation holes in any of the components.
Ar range the components so that air can circulate freely.

•

Do not stack components.

•

Allow adequate ventilation when placing your
components in a stand.

•

Place an amplifier or satellite receiver on the top shelf of
the stand so heated air rising from it will not flow
around other components.

➣

Setting Up the VCR

First things first

➣

recording

VCR Basics

➣

OTHER FEATURES

Connections

➣

PROGRAMMING THE
REMOTE

Summary of Contents for VR615HF

































































Search results

Summary of Contents for VR615HF

Reviews:

Related manuals for VR615HF

Brands by name

Popular brands

RCA VR615HF, User Manual

Search results

Summary of Contents for VR615HF

Reviews:

Related manuals for VR615HF

Brands by name

Popular brands