background image

20

Recording a Program

Your VCR provides different recording features.  These features are explained in the following sections.

Recording Speeds

Press 

SPEED

on the remote to select a recording speed (SP, LP, or SLP).  The speed you select appears on

the TV screen.

SP (Standard Play) gives the best quality recording.  That is why most
prerecorded, rental tapes are recorded in SP.  Fewer programs can be recorded
on the tape.  Special effects such as pause, frame advance, slow motion, and
picture search work well in this speed.

LP (Long Play) gives twice the recording time of tapes recorded in SP.

SLP (Super Long Play) gives three times the recording time of tapes recorded
in SP.  Special effects such as pause, frame advance, slow motion, and picture
search work well in this speed.

Recording Pause

This feature lets you prevent recording short passages of unwanted material.  

Press 

PAUSE 

during recording to stop and start recording.

The VCR automatically switches from pause to stop after a few minutes.

Basic Recording – Operating Instructions

To make a recording

Turn on the TV and tune it to the VCR viewing channel, either  3, 4, or the TV’s video input channel.

1.

Insert a tape with its safety tab in place.

2.

If you are using one of the basic hookups, make sure the 

VCR 

indicator

appears in the VCR’s display panel.  If not, press 

TV•VCR

to turn it on.

3.

Use 

SPEED 

on the remote to select a recording speed.  The tape speed

indicator appears on the TV screen. 

4.

Select the channel to be recorded.  The channel number appears on the TV
screen.

5.

Press 

RECORD

and 

PLAY 

at the same time on the VCR or 

REC

on the

remote to begin recording.  The 

RECORD 

indicator appears in the VCR’s

display panel while the VCR is recording. 

Watch a TV channel while VCR is recording a different channel

1.

Follow steps 

1

through 

5

above.

2.

If you are using one of the basic hookups, press 

TV•VCR

to switch to the

TV channel.  The 

VCR 

indicator turns off in the display panel.

3.

Select the channel you want to watch with the TV’s channel buttons.

4.

Press 

STOP•EJECT

on the VCR or 

STOP 

on the remote when the

recording is finished. 

Types of Recordings

Recording Time 

Cassette

SP LP

SLP

T-120

2Hr

4Hr

6Hr

T-160         2Hr 40Min

5Hr 20Min

8Hr

Summary of Contents for VR603AHF





































Reviews: