Installing the battery in the player
1. Remove the USB plug cover and then apply
thumb pressure to slide the battery
compartment cover in the direction of the arrow,
then remove the cover.
2. Insert an AAA battery, following the polarity
marks in the battery compartment.
3. Replace the cover.
• Refer to the battery level icon
on the display
to check the battery level. Replace the battery
when the icon is empty.
Before you begin
8
Computer system requirements
• Pentium III 500MHz or higher recommended
• Windows® XP (service pack 1 or higher) or
Windows® 2000
• Internet
access
• Windows Media Player 9 or higher
• 128MB RAM (256MB recommended)
• CD drive capable of digital audio extraction
• USB port (2.0 recommended)
• Sound
card
Getting the latest software, firmware
and information
Go to www.rcaaudiovideo.com/downloads for the
latest firmware and user manual for your player.
Follow the instructions there to download and
install files.
Frequently asked questions
For answers to frequently asked questions (FAQ), go
to www.rcaaudiovideo.com/faq.
Dear RCA Customer,
Thank you for purchasing the Player. This product
will play mp3 and Windows Media
™
audio (WMA)
content as well as Digital Rights Management
(WMDRM-9) protected music files.
Copyright warning
This player is for your personal use only.
Unauthorized recording or duplication of
copyrighted material may infringe upon the rights
of third parties and may be contrary to copyright
laws.
Back up your data
As with any portable player, you must back up the
drive regularly. The manufacturer is not responsible
for lost data.
Unpacking your player
All of the items listed below should have been
packed in the box with your player.
• RCA player (contains the user manual)
• Quick Start Guide
• Earphones
• USB extension cable
• AAA
battery
Windows and Windows Media are trademarks or registered trademarks of Microsoft Corporation in the United States and other countries.
