The Menu System
20
Chapter 2
This is the PICTURE QUALITY menu with the PRESETS
option highlighted.
:
MEMORY
: NORMAL
: LOW
P I C T U R E Q U A L I T Y
SEL.
ADJ.
CONTRAST
BLACK LEVEL
SHARPNESS
COLOR
TINT
PRESETS
COLOR TEMP.
NOISE REDUCE
R
G
RETURN
CONTRAST
This is the CONTRAST screen.
Adjusting the Picture Settings in MEMORY Mode
In MEMORY mode, you can set and save the following picture adjustments:
CONTRAST – Changes the picture’s contrast (between light and dark).
BLACK LEVEL – Makes the picture lighter or darker.
SHARPNESS – Changes the picture’s sharpness.
COLOR – Changes color density (video input only).
TINT – Changes picture tint (video input only).
COLOR TEMP – Changes the color tone.
NOISE REDUCE – (noise reduction)– Removes extraneous information from the signal to make the picture
clearer.
NOTE: Only the contrast and brightness can be adjusted when a computer signal is used.
Once you have selected MEMORY mode, you can adjust the picture settings. For example, to change the
contrast setting:
1. Use the
▲
or
▼
button to highlight the CONTRAST option. Press the
button to select it. The CONTRAST window appears. Use and
buttons
to adjust the contrast.
NOTE:
If you don’t push the or button within 5 seconds, the
current setting is accepted and the previous screen reappears.
2. Once the contrast is adjusted, press OK or MENU. The contrast is set and you
are returned to the PICTURE QUALITY menu.
3. Use the same procedure to adjust the black level and sharpness settings.
4. When you are finished adjusting the picture settings, press GO BACK to
return to the main menu or press CLEAR to exit the menu system.
If the “CONTROL NOT AVAILABLE” message appears when you are trying to
change the picture settings, make sure the preset mode is set to MEMORY. You
can only change picture settings in MEMORY mode. The other modes are pre-
set and can’t be changed.
