- 13 -
Quick Setup
When turned on for the fi rst time or after resetting
it to the factory default, the Quick Setup menu will
pop up as following.
Follow the below steps to make the basic settings for
using the Blu-ray player.
1. Press
OK
to perform Quick Setup.
• To exit Quick Setup, press button to select
“No” and then press
OK
.
The display for Player Menu Settings selection
appears.
2. Press or
button to select English, French or
Spanish and press
OK
.
3. Press button to select “Next” and press
OK
, then the display for Resolution selection
appears.
Would you like to do Quick Setup?
Yes
No
Player Menu Settings
English
French
Spanish
Next
Return
Resolution
1080p
1080i
720p
Next
Return
HDMI Auto
480p
480i
4. Press or
button to select HDMI Auto, 1080p,
1080i , 720p, 480p or 480i and press
OK
.
(For details about the Resolution, please see page
21.)
6. Press or
button to select 16:9 Wide, 16:9
Pillarbox, 4:3 Pan and Scan or 4:3 Letterbox and
press
OK
.
(For details about the TV Aspect, please see page
21.)
7. Press button to select “Next” and press
OK
.
The display for “Quick Setup complete” appears
and press
OK
to exit the setup.
5. Press button to select “Next” and press
OK
, then the display for TV Aspect selection
appears.
TV Aspect
16:9 Pillarbox
4:3 Pan and Scan
4:3 Letterbox
Next
Return
16:9 Wide
Notes
• You can restore the settings to -the factory
settings (see page 24).
• You can run Quick Setup again from “Quick
Setup“ in “Settings” (see page 25).
