7
EN
Settings
6
EN
Settings
Showing Demonstration
Press
DIMMER / DEMO
to turn on/off
demonstration in standby mode. The
demonstration scrolls through all display
operations.
Setting the Clock
1. Press and hold
CLOCK
until the hour flashes
on the display.
2. Press
DIGITAL TUNING
or
to set the
hour and then press
CLOCK
to shift to minute
digits.
3. Press
DIGITAL TUNING
or
to set the
minute.
4. Press
PROG•SET
to save settings or
STOP
to quit setting.
Setting the Timer
1. Press and hold
TIMER
until the ON and clock
hour flashes on the display ( ON - timer on
time ).
2. For setting time, press
DIGITAL TUNING
or
to set the hour and then press
TIMER
to shift to minute digits.
3. Press
DIGITAL TUNING
or
to set
the minute.
4. Press
TIMER
to change to OF (timer off time)
with clock time flashing. Repeat steps 2 & 3
for timer off time setting.
5. Press
TIMER
to select source. Press
DIGITAL
TUNING
or
to select between CD /
TUNER .
6. Press
TIMER
to set volume. Adjust
VOLUME
CONTROL
to select desired volume level.
7. Press
PROG•SET
to save settings.
Press
STOP
to quit setting.
The timer is automatically activated once timer
setting is saved.
Activating the Timer
Press and release
TIMER
to turn on/off the alarm.
The timer icon is displayed when timer is
activated.
Adjusting the Display Brightness
1. Press and hold
DIMMER/DEMO
for more than
2 seconds.
2. While the current dimmer level is displayed,
press and release
DIMMER/DEMO
repeatedly
to select the desired level (DIMM 1 - 3).
Note:
When system is ON, you can press
CLOCK
to display the current time for about 2
seconds.
Sleep Mode
You can select the time interval in minutes before
the unit turns off automatically.
Press
SLEEP
to select among OFF, 120, 90, 60, 45,
30, 15 and 5 minutes.
The icon lights on the display when sleep
mode is activated.
View Remaining Sleep Time
When sleep is activated, press
SLEEP
once to
view remaining sleep time.
Adjust Sleep Time
Press
SLEEP
again when the remaining sleep time
is displayed to change sleep time.
Note:
Sleep is automatically de-activated when
the unit is turned off.
Sound Features
Volume Control
Press
VOLUME CONTROL
or on the main
unit or press
VOL
or on the remote
control to adjust volume level. The bars on the
volume display increases and decreases to show
the change in volume level.
Bass Boost
Press
BASS BOOST
to turn on/off boosting the
bass frequency. The BASS icon lights on the
display when it is activated.
Muting Audio
Press
MUTE
on the remote to cut the sound.
(Remote Only)
Using Preset Equalizer Curves
Press
EQ
to toggle among FLAT, ROCK, POP, JAZZ,
CLASS and CUSTOM. The display shows your
selection briefly.
Creating a Custom Curve
1. Press
EQ
to select CUSTOM mode.
2. While CUSTOM is displayed, press
DIGITAL
TUNING
or
to cycle among
displayed bass- and treble - range levels.
3. While BAS or TRE is displayed, adjust
VOLUME CONTROL
to set the associated gain
between -10 - +10.
RS2654_EN 12/21/05 10:52 AM Page 12
