EN
EN
4
5
General Controls
Display Settings
Display
Showing Demonstration
Press
DIMMER•DEMO
to turn on/off demonstration
mode. The demonstration scrolls through all display
operations.
Display Clock / Timer
Setting the Clock
1. Press and hold
CLOCK
until the hour flashes on
the display.
2. Press
DIGITAL TUNING
or to set the
hour and then press CLOCK to shift to minute
digits.
3. Press
DIGITAL TUNING
or
to set the
minute.
4. Press
PROG•SET
to save settings or
STOP
to
quit setting.
Setting the Timer
1. Press and hold
TIMER
until
ON
(timer on time)
appears with the hour flashing.
2. For setting time, press
DIGITAL TUNING
or
to set the hour and then press
TIMER
to shift
to the minute digits.
3. Press
DIGITAL TUNING
or to set the
minute.
4. Press
TIMER
to change to
OF
(timer off time)
with hour flashing. Repeat steps 2 & 3 for timer
off time setting.
5. Press
PROG•SET
to save settings or
STOP
to
quit setting.
Activating the Timer
Press and release
TIMER
to turn on/off the timer. The
timer is active when the clock icon is lit.
Adjusting the Display Brightness
1. Press and hold
DIM-
MER•DEMO
for more
than 2 seconds.
2. While the dimmer is
displayed, press and
release
DIMMER•DEMO
repeatedly to select the
desired level (DIMM 1 - 3).
Sleep Mode
You can select the time interval in minutes before
the unit turns off automatically. Press
SLEEP
on the
remote to select among OFF, 120, 90, 60, 45, 30, 15
and 5 minutes. (Remote Only)
The sleep icon flashes on the display when sleep
mode is activated.
When sleep is activated, press
SLEEP
once to view
remaining sleep time.
Press
SLEEP
again when the remaining sleep time is
displayed to change sleep time.
DIMM 2
Remote Control
— Turns power on or off from
STANDBY
mode.
CD
— Selects CD player.
TUNER
— Selects radio tuner and changes radio band in Tuner mode.
TAPE
— Selects tape player.
AUX
— Selects Aux mode; turns the system on.
CD INFO
— Selects among disc display information.
B. BOOST
—Turns Bass Boost on or off.
DEMO/DIMMER
—Turns the feature demonstration on or off; adjusts dis-
play brightness;
VOL+ / VOL-
— Increases/ decreases volume.
PLAY/PAUSE
— Plays and pauses current CD.
NEXT /FWD
— In CD mode - Skips forward to the next CD track;
In Tuner mode - Tunes up radio frequency.
PREV /REV
— In CD mode - Skips backwards to the previous CD
track; In Tuner mode - Tunes down radio frequency.
OPEN/CLOSE
— Opens and closes CD disc tray.
STOP
— Stops playing CD.
REPEAT
— Repeats a track, CD, or all CDs.
— mutes and restores audio output.
— Turns on/off random playback.
FM ST.
— Switches between FM stereo and mono modes.
DISC SKIP
— Skips to next CD.
INTRO
— Turns INTRO mode on or off to play the first 10 seconds of each
track.
DN•FOLDER/PRESET•UP
— Selects previous / next tuner preset
station and previous / next folder during mp3/WMA CD playback.
SLEEP
— Selects the time interval in minutes before the unit turns off.
Installing Batteries
The remote control must be inserted with 2 “AAA” or “R3” or “UM 4”
batteries prior to use. Follow the steps below to ensure correct installation.
1. Open the battery compartment door (located at the back of the remote
control) by sliding the cover out.
2. Before inserting the batteries, observe the polarities (that is, + and -) of
the battery then relate the polarities to the engraved diagram inside the
battery compartment. Now insert the batteries.
3. After installation of the batteries, place the lit to cover the batteries.
Lightly push it closed with a snap.
Note
:
Cassette functions can not be operat-
ed from the remote control.
Note
:
When system is ON, you can press
CLOCK
to display the current time
for about 2 seconds.
Note
:
Sleep is automatically de-activated
when the unit is turned off.
Note
:
The wake up timer source will be
the source you are in when set-
ting the timer.
RS2653_55_EN(TCEC) 1/13/06 1:27 PM Page 8
