7
Settings
EN
Showing the Demonstration
Press
DIMMER/DEMO
to turn on/off demonstration
mode. The demonstration scrolls through all display
operations.
Setting Clock / Timer
Setting the Clock
1. Press and hold
CLOCK
until the hour flashes on
the display.
CLOCK SET
will show on the
second row of the display to indicate you are
currently in clock setting mode.
2. Press
DIGITAL TUNING
or on the
main unit or
PRESET / PREV
or
PRESET / NEXT
on the remote control to
select the hour.
3. Press
CLOCK
to shift to minute digits.
4. Follow step 2 to set the minute digits.
5. Press
PROG.•SET
to confirm and save settings.
Press
STOP
to quit setting.
Note: When system is ON, you can press CLOCK to
display the current time (CURR TIME) for about 2
seconds.
Setting the Timer
1. Press and hold
TIMER
until
ON 12:00 AM
appears with the hour flashing (ON - timer on
time).
ALARM SET
will show on the second
row of the display to indicate you are currently in
timer setting mode.
2. Press
DIGITAL TUNING
or on the
main unit or
PRESET / PREV
or
PRESET /
NEXT
on the remote control to select the
hour.
3. Press
TIMER
to shift to minute digits.
4. Repeat step 2 to select minute digits.
5. Press
TIMER
to shift to timer off time setting.
6.
OF 12:00 AM
(timer off time) will show on
the display with hour flashing. Repeat steps 2 - 4
for timer off time setting.
7. Press
TIMER
to select source.
8. Press
DIGITAL TUNING
or on the main
unit or
PRESET / PREV
or
PRESET / NEXT
on the remote control to select between CD
MODE /TUNER / TAPE.
8. Press
TIMER
to set volume.
9. Rotate
the
VOLUME CONTROL
knob on the
main unit or press
VOL +
or
VOL -
on the remote
control to set desired volume level.
10. Press
PROG.•SET
to confirm and save settings.
Press
STOP
to quit setting.
Activating the Timer
Press and release
TIMER
to activate and deactivate
the timer.
will lit when the alarm is active.
12:00 AM
CLOCK SET
ON 12:00 AM
ALARM SET
RS2625 EN 4/1/03 4:07 PM Page 11
