8
1. Press
SOURCE
to select
TUNER
.
2. Press
BAND
to select between AM or FM radio
band.
Tuning to a Station
Press
SKIP FORWARD / BACKWARD
to select frequencies.
Using Presets
The tuner can be either
TUNE or PRESET mode.
When in PRESET mode, the PROG light is on.
Press
SKIP BACKWARD
or
SKIP FOR-
WARD
on the main system or
PRESET UP
or DOWN
on the remote control to access the previ-
ous or next preset station. The display first shows the
preset program number and after a few seconds, the
frequency and preset program number will be dis-
played. (FMPR:01 is FM preset 1)
Note: You can toggle between TUNE or PRESET mode
by pressing
TUNE/PRESET
button.
Auto Preset
Programming
(for FM only)
Press and hold
BAND
button for 2 second to scan sta-
tions in the selected band. The stations will then be
stored as preset channels. A Maximum 32 stations can
be stored. Beware of your preset channels being
erased accidentally because the scanning and storing
process is automatic upon pressing the button.
You can stop the automatic scan by pressing any but-
ton, but the erased stations cannot be recovered.
Setting Presets
1. Press
SKIP FORWARD / BACKWARD
to access the desired frequency.
2. Press the
SET
button once.
3. The most recently accessed program location will
be displayed.
4. If a different program location is preferred, press
SKIP BACKWARD / FORWARD
to move to the desired preset number (1-32).
5. Press
SET
to store the selected frequency at that
preset.
Suppressing Stereo Signal
Press
FM ST
to toggle between FM mono and stereo
for stereo FM stations. (Remote Only)
PR:01
87.50 MH
z
TIMER
AUTO PROG.
TUNE/PRESET
OPEN/CLOSE
STANDBY
CLOCK PROG./SET
ROCK
/CLASSIC
CUSTOM/FLAT
POP/JAZZ
VOLUME
D
OW
N
UP
Tip: Your audio system has 32 preset stations.
EN
Tuner
RS2606EA 7/16/02 5:30 PM Page 12