5
Display Settings
EN
Display
Showing Demonstration
Not operational in CD mode. Press
DEMO/DIMMER
to turn on/off demonstration mode. The demonstra-
tion scrolls through all display operations.
Display Clock / Timer
Setting the Clock
1. Press and hold
CLOCK
until the hour flashes on
the display.
2. Press
SKIP BACKWARD
or
SKIP
FORWARD
to set the hour and then press
CLOCK
to shift to minute digits.
3. Press
SKIP BACKWARD
or
SKIP
FORWARD
to set the minute.
4. Press
PROG./SET
to save settings and
STOP
to quit
setting.
Note:
When system is ON, you can press
CLOCK
to
display the current time for about 2 seconds.
Setting the Timer
1. Press and hold
TIMER
until the
ON
appear with
the hour flashing (
ON
- timer on time )
2. For setting time, press
SKIP FORWARD
/
SKIP BACKWARD
to set the hour and then
press
TIMER
to shift to minute digits.
3. Press
SKIP FORWARD
/
SKIP BACKWARD
to set the minute.
4. Press
TIMER
to change to
OF
(timer off time) with
hour flashing. Repeat steps 2 & 3 for timer off
time setting.
5. Press
TIMER
to select source. Press
SKIP
FORWARD
/
SKIP BACKWARD
to select between CD /TUNER / TAPE)
6. Press
TIMER
to set volume. Press volume
UP
/
DOWN
to set desired volume level.
7. Press
PROG./SET
to save settings or
STOP
to quit
setting.
Activating the Timer
Press and release
TIMER
to turn on/off
the timer. The timer is active when the
clock icon is lit.
Adjusting the Display Brightness
1. Press and hold
DEMO/DIMMER
for
more than 2 seconds.
2. While the dimmer is displayed, press and release
DIMMER to select the desired level (DIMM 0 - 3).
Sleep Mode
You can select the time interval in minutes before the
unit turns off automatically. Press SLEEP on the
remote to select among OFF, 90, 60, 45, 30, 15 and 5
minutes. (Remote Only)
BASS
SURROUND
DIMM 2
RS2600-EN rev.1 3/1/02 4:20 PM Page 9
