Setting the Clock
1. Press and hold
CLOCK
on the remote
control until the hour flashes on
the display.
2. Press
or
to set the hour and then
press
CLOCK
to shift to minute digits.
3. Press
or
to set the minute.
4. Press
CLOCK
to save settings. Or press
TUNE/PRESET
to cancel the setting.
Timer and Program Recording
You can turn on/off the unit or record
TUNER at preset times by setting the timer.
You can use Program Recording to preset
the unit to record your favorite radio
program. When setting the timer, choose
REC TUNER as the source to record radio at
the preset time. Ensure there is adequate
memory in the USB device connected.
Setting the Timer
1. Press and hold
TIMER
on the remote
control until Timer On and the clock hour
flashes on the display.
2. Set the Timer On setting. Press
or
to set the hour and then press
TIMER
to
shift to minute digits.
3. Press
or
to set the minute.
4. Press
TIMER
to change to Timer Off
setting with clock time flashing. Repeat
steps 2 & 3 for timer off time setting.
5. Press
TIMER
to select source. Press
or
to select DISC/USB/iPod/REC TUNER/
TUNER. If REC TUNER is selected, press
or
to select the preset station after
pressing
TIMER
.
6. Press
TIMER
to set volume. Adjust
VOLUME CONTROL
to select desired
volume level.
7. Press
TIMER
to save settings. Press
TUNE/PRESET
to cancel setting.
The timer is automatically activated once
timer setting is saved.
Activating the Timer
Press
TIMER
to turn on/off the alarm. The
timer icon
is displayed when timer is
activated.
Sleep Mode
You can select the time interval in minutes
before the unit turns off automatically.
Press
SLEEP
to select among OFF, 120, 90,
60, 45, 30, 15 and 5 minutes.
The
Sleep
icon lights on the display when
sleep mode is activated.
View and Adjust Remaining Sleep Time
When sleep is activated, press
SLEEP
once to
view remaining sleep time. Press again to
change the time.
Showing Demonstration
Press
DEMO/DIMMER
to turn on/off
demonstration mode.
Adjusting Brightness
Press and hold
DEMO/DIMMER
until
"
DIMMER X
" displays where "X" represents
the brightness level. Press
DEMO/DIMMER
to adjust the brigtness level and press any
buttons to save setting and exit.
7
EN
Display and Settings
Note:
Sleep is automatically
de-activated when the unit is turned off.
Play Mode status
EQ status
Folder/audio file indication
Source indication
RS2120i EN 27/3/07 11:05 AM Page 14
