EN
Settings
4
Setting Clock Time
Manual Setting (first time setting)
1. Press
CLOCK/TIMER
to enter clock setting mode,
XX:XX will show on the display.
2. Press
and
to set the hour.
3. Press
PROG
•
SET/CLEAR
to confirm.
4. Press
and
to set the minutes.
5. Press
PROG
•
SET/CLEAR
to confirm the setting.
6. Press
and
to select 12/24 hour mode.
7. Press
PROG
•
SET/CLEAR
to confirm the setting.
8. You can re-adjust the clock time by pressing
PROG
•
SET/CLEAR
(only in standby mode), and
repeat step 2-6.
Setting the Timer On Time
1. Press
CLOCK/TIMER
until
ON
XX:XX is displayed.
2. Press
PROG
•
SET/CLEAR
to enter edit mode, the
hour will flash.
3. Press
and
to confirm and set the hour.
4. Press
PROG
•
SET/CLEAR
to move to the minutes
digits.
5. Press
and
to set the minutes.
6. Press
PROG
. to confirm the TIMER ON setting. If
Tuner source is selected, the next step when
PROG
•
SET/CLEAR
is pressed is to select preset
station (1-30).
7. Press or to select source ( CD / TUNER/
TAPE/REC TUN) and move to the source selection.
8. Press
PROG
•
SET/CLEAR
to move to volume setting.
9. Press or to select desired level.
10. Press
PROG
•
SET/CLEAR
to move to timer off time
setting, OFF XX:XX will show on display.
11. Repeat step 2-5 to set timer off hour and minute.
12. Press
PROG
•
SET/CLEAR
to confirm setting.
Note: When setting timer on time, the
internal clock of the unit will not stop, you
are advised to set the timer on time at 5
minutes later or more. Or else the Timer
may not operate properly.
Note: When the unit displays “TIME NG”,
this means the timer setting is conflicting,
this message will be displayed until the
timer setting is corrected.
Activating the Timer
Press
CLOCK/TIMER
on the main unit for 2
seconds to turn the Timer on or off. TIMER will
show on the display when it is on. The unit will
turn on when the timer on time is reached.
Note:If clock time is not set,SET CLOCK will flash
on the display when you try to activate the timer.
If time setting have not been entered,SET TIMER
will flash on the display when you try to activate
the timer.
Setting Sleep Time
Press
SLEEP
on the remote to toggle among OFF,
120 to 15 minutes in 15 minutes step.
Sound Features
Press flat / classic, rock, pop and jazz to select
their corresponding mode.
X-BASS — press X-BASS to turn on/off x-bass.
Press
MUTE
to silence sound.
RS2022 EN
12/11/02, 11:01 AM
9
