EN
5
Display Settings
Display
Showing the Demonstration
Operational in standby mode only. Press
DEMO
on
the main unit to turn on/off demonstration mode.
The demonstration scrolls through all display
operations.
Display Clock / Timer
Setting the Clock
1. Press and hold
CLOCK
to enter clock setting
mode. The hour flashes on the display.
2. Press
PRESET DOWN
or
PRESET UP
on the main
unit or
PRESET -
or
on the
remote control to set the hour . Press
CLOCK
to
shift to minute digits.
3. Press
PRESET DOWN
or
PRESET UP
on the main
unit or
PRESET -
or
on the
remote control to set the minute .
4. Press
PROG/SET
to save settings.
Note:
• Press
CLOCK
once to display the current time for
about 8 seconds.
Setting the Timer
1. Press and hold
TIMER
to enter timer setting
mode.
ON TIME
will should briefly, then the
hour digit will flash on the display.
2. Press
PRESET DOWN
or
PRESET UP
on the main
unit or
PRESET -
or
on the
remote control to set the hour . Press
TIMER
to
shift to minute digits.
3. Press
PRESET DOWN
or
PRESET UP
on the main
unit or
PRESET -
or
on the
remote control to set the minute .
4. Press
TIMER
to shift to set timer off time.
5.
OFF TIME
will show briefly then the hour digit
will flash. Repeat steps 2 and 3 to set the hour
and minute.
6. Press
TIMER
to move on to source selection.
7. Press
PRESET DOWN
or
PRESET UP
on the main
unit or
PRESET -
or
on the
remote control to select source (CD / Tuner / Tape
/ Rec TU)
8. Press
TIMER
to move back to timer on time
setting.
9. Press
PROG/SET
to save settings.
Note:
Timer will turn on at the last volume level.
Activating the Timer
Press and release
TIMER
to turn on/off the timer. The
TIMER
indicator will lit.
Adjusting Display Brightness
Press and hold
DIM/DEMO
to adjust display
brightness.
Sleep Mode
You can select the time interval in minutes before the
unit turns off automatically.
1. Press
SLEEP
to enter sleep setting mode.
SLEEP 00
will show on the display.
2. Press and hold
SLEEP
to select the desired sleep
time (00, 90, 80, 70, 60, 50, 40, 30, 20, 10, 00).
Press
SLEEP
to check the remaining sleep time.
S
RS2010 EN rev.1 9/2/02 9:40 AM Page 9
