EN
Remote Control
3
POWER
- Turns the unit on/off
FUNCTION
- Selects Tuner, Tape and CD mode.
MUTE
- Mutes volume.
TIMER
- Enables or disables timer.
SNOOZE
- Enters snooze mode when timer is on.
SLEEP
- Selects sleep time of 60 min, 30 min and off.
INTRO
- Selects Intro play in CD mode.
DISP
- Shows clock time and timer on time
PROG.
- Enters program setting mode; confirms your
settings
REPEAT/PRESET UP
- In CD mode - toggles repeat options
(repeat disc / repeat track / repeat off);
In Tuner mode - Selects preset station.
STOP
- Stops CD playback.
PRESET EQ
- Selects among different sound effects (classic /
flat / rock / pop)
SHUFFLE
- Plays tracks randomly in CD mode.
BAND
- Selects band in tuner mode.
SKIP BACKWARD
-
In CD mode
- Skips backwards to
the previous tracks.
In Tuner mode
- searches down radio frequency.
SKIP FORWARD
-
In CD mode
- Skips forward to the
next track.
In Tuner mode
- searches up radio frequency.
PLAY/PAUSE
- Plays and pauses CD playback.
VOLUME CONTROL
- Lowers volume level.
VOLUME CONTROL
- Increases volume level.
Installing Batteries
The remote control must be inserted with 2 “AAA” or
“UM4” or “R03” batteries prior use. Follow the steps
below to ensure correct installation.
1. Remove the battery compartment door (located at the
back of the remote control) by sliding the compartment
door in the direction of the arrow and then lifting the
door out and off the cabinet.
2. Before inserting the batteries, observe the polarities (that
is, + and -) of the battery, then relate the polarities to
the engraved diagram inside the battery compartment.
Now insert the batteries.
3. After installation of the batteries, replace and fit the lid
to cover the batteries. Lightly push it closed with a snap.
VO
LUME CONTRO
L
BAND
REPEAT
PRESET UP
SOURCE
POWER
TIMER
SNOOZE
SLEEP
INTRO
PROG.
DISPLAY
STOP
PRESET EQ.
STOP
RS2000 EN
2/26/02, 5:21 PM
8
