RCA RPW250 Instruction Manual Download Page 3

IMPORTANT SAFETY INSTRUCTIONS

WARNING-To reduce the risk of fire, electric shock, or injury to persons when using your 

 

appliance, follow basic precautions, including the following : 

1.  Read all instructions before using the appliance .
2.  Use this appliance only for its intended purpose as described in this use and care guide.
3.  Use only detergents or softeners as recommended for use in this manual and keep them

      out of the reach of children.

4.  This appliance must be properly installed in accordance with the installation instructions 

      before it is used.

5.  Never unplug your appliance by pulling on the power cord. Always grasp the plug firmly 

     and pull straight out from the outlet.

6.   Replace immediately any worn power cord, loose plugs and power outlets.
7.   Unplug your appliance before cleaning or before making any repairs.
8.   If your old appliance is not being used, we recommend that you remove the door. 
      This will  reduce the possibility of danger to children.
9.   Do not operate your appliance in the presence of explosive fumes.
10. Do not wash or dry articles that  have been  previously  cleaned in, washed in, 
      soaked in  or spotted with gasoline, dry-cleaning solvents, other flammable or explosive 
      substances as they give off vapors that could ignite or explode.
11.Clothes or rags used to clean flammable or explosive materials should not be washed 
     in this appliance until all traces of this material have been removed.
12.Do not add or mix any flammable or explosive substances to the wash.
13.Do not try to remove clothes while the tub is moving. Allow it to come to a complete stop 
     before reaching in.
14.The appliance’s loading door must be closed when the tub is spinning.
15.Do not operate your appliance when parts are missing or broken.
16.Do not use this appliance for commercial uses.
17..Do not operate  this appliance unless all enclosure panels are properly in place.
18.Do not tamper with controls.
19.Do not allow children to play on or in the appliance. Close supervision of children is 
     necessary when the appliance is used near children.
20.This appliance must be connected to a proper electrical outlet with the correct electrical 
     supply.
21.Proper grounding must be ensured to reduce the risk of shock and fire. DO NOT CUT OR 
     REMOVE THE GROUNDING PLUG. If you do not have a three-prong electric receptacle 
     outlet in the wall, have a certified electrician install the proper receptacle. The wall 
     receptacle MUST be properly grounded.
22.Under certain condition , hydrogen gas may be produced in a hot water system that 
     has not been used for 2 weeks or more .  HYDROGEN  GAS IS  EXPLOSIVE .If the 
     hot water system has not been used for such a period , before using a washing 
     machine or combination washer-dryer ,turn on all hot water faucets and  let the water 
    

SAVE THESE INSTRUCTIONS

GROUNDING INSTRUCTION

This appliance must be grounded. In the event of malfunction or 
breakdown, grounding will reduce the risk of electric shock by 
providing a path of least resistance for electric current. 
This appliance is equipped with a  cord  having an  equipment-
grunding conductor plug. The plug must be plugged into an appropriate 
outlet that is properly installed and grounded in accordance with all 
local codes and ordinances.

WARNING - Improper connection of the equipment-grounding 
conductor can result in a risk of  electric shock. Check with a qualified  
electrician or serviceman if you are in  doubt as to doubt as to whether 
the appliance is properly grounded.Do not modify the plug provided 
with the appliance - if it will not fit the outlet,  have a proper outlet 
installed by a qualified electrician.

WARNING – To reduce the risk of electric shock disconnect this 
appliance from the power supply before attempting any user 
maintenance. Turning the controls to the  OFF position does not 
disconnect this appliance  from the power supply.     

     

flow each for several minutes . This will release any accumulated hydrogen gas .As the 

     gas is flammable ,do not smoke or use an open flame during this time.
23.Do not repair or replace any part of the appliance or attempt any servicing unless 
     specifically recommended in the user-repair instructions, which you understand and have
     the skill to carry out.  
      
     

Note:If for any reason this product requires service, we strongly recommend that a 

     certified technician perform the service. 

24.To reduce the risk of electric shock or fire, do not use extension cords or adapters to 
      connect the unit to an electrical power source. 
      

2

3

Important safety instructions

Important safety instructions

Summary of Contents for RPW250























Reviews: