EN
6
Operating the Clock
Turning off Alarm
Silence the alarm momentarily
Press
SNOOZE
. The alarm will sound again
when the snooze period is over. (see
“
Snooze Alarm Operation
”).
Stop the alarm
Press
OFF
. Then the alarm will be on the
following day at the same time.
Disable the alarm permanently
1. Press
CANCEL
button.
2. The
WAKE 1
and
WAKE 2
indicator will
be flashing.
3. Press
WAKE 1
or
WAKE 2
button within
3 seconds to deactivate the alarm function
permanently, “
OFF
” will be shown when
the above procedures are done.
Tip: You can activate the previously
set alarm time by pressing
WAKE 1
WAKE 1
WAKE 1
WAKE 1
WAKE 1
or
WAKE 2
WAKE 2
WAKE 2
WAKE 2
WAKE 2
button.
Snooze Alarm Operation
This operation allows extra sleep time af-
ter the alarm is on. The alarm will be off
by pressing
SNOOZE
until the snooze pe-
riod is over, the default SNOOZE period is
9 minutes.
Seconds Time Display
The unit may display in seconds.
1. The clock should be in normal mode.
2. Press and hold
SNOOZE
to show sec-
onds display.
3. Release
SNOOZE
to return to the hour
and minute display.
Changing the lens
The unit has three different lens provided:
blue, green and gray. You may change your
favourite colour with the hexagon key
(size: 3/32” ) located at the buttom of the
unit.
Brightness control
You can adjust the back-
light by the
DIMMER
but-
ton, there are three modes
you may select from:
AUTO
- Backlight on for a
few seconds whenever a
button is pressed.
HIGH
- Backlight always
high.
LOW
- Backlight always
low.
DIMMER
Hi
Lo
AUTO
RP3722 EN-CAN
3/8/02, 3:57 PM
7
