background image

21

Using the universal remote control

Programming
the Universal Remote

You can program the universal remote to control most brands of remote
controllable TVs, VCRs and cable boxes. If you have an RCA, GE or ProScan VCR,
you may not need to program the remote at all. Other manufacturer’s brands
need to be programmed.

Programming for use with Your TV/VCR

To determine whether you need to program the universal remote, turn on the
TV or VCR, point the remote at the TV/VCR’s remote sensor and press TV/VCR.
Then, press the POWER or CHAN up (^) or down (v) button to see if the TV/VCR
responds to the remote commands. If not, you need to program the remote.

Follow these steps to program your universal remote to control your TV/VCR:

1.

Turn on the TV/ VCR.

2.

Look up your TV/VCR brand and code number(s) in the code list in
appendices or on the code sheet packed with your remote.

3.

Press and hold the TV/VCR 1 button on the remote.

4.

Enter the three-digit code from the code list.

5.

Release the TV/VCR 1 button, then press POWER to see if the TV/VCR
responds to the remote commands. If not, try pressing TV/VCR 1
then POWER.

6.

Repeat steps 3 through 5 using the next code listed for your TV/VCR
brand until the TV/VCR responds to the remote commands.

Programming for use
with your cable  Box/satellite receiver

1.

Turn on the cable box/satellite receiver.

2.

For your cable box, look up the brand and its code number(s) in the
code list in appendices or on the code sheet packed with the
remote. For your satellite receiver, look up the brand and
corresponding code number(s) in the list to the right.

3.

Press and hold the DSS•CABLE button on the remote.

4.

Enter the three-digit code from the code list.

5.

Release the DSS•CABLE button, then press POWER or CHAN up (^)
or down (v) to see if the cable box/receiver responds to the remote
commands. If not, try pressing DSS•CABLE, then POWER again to see if the
cable box/receiver responds.

6.

Repeat steps 3 through 5 using the next code listed for the brand of
your cable box/receiver until it responds to the remote commands.

NOTE: 

 Your remote is preprogrammed to control the RCA brand Digital

Satellite Receiver. A few of the remote buttons used with the RCA brand
Digital Satellite Receiver are shown to the right. You may want to
experiment with other buttons to see if they work with your receiver.

Chaparral.....................080,081

Cheyenne.............................081

Drake............................082,083

RCA brand Digital Satellite

System........................000

General Instruments

....................092,093,094

RCA.....................................000

Realistic...............................084

Sierra I,II,III....................081

STS1.....................................085

STS2.....................................086

STS3.....................................087

STS4.....................................088

Toshiba................................089

Uniden.................................090

Video Cipher II..............091

Receiver Remote

DISPLAY

PREV CH

ANTENNA

CLEAR

MENU

MOVE ARROWS

works like

RCA brand Digital

Satellite System Remote

SELECT/DISPLAY

PREV CH

TV/DSS

CLEAR

MENU

ARROWS

SATELLITE

RECEIVER CODES

This remote may not
operate all models of the
brands shown.

If a battery is removed from
the battery compartment of
the remote control, all
control key functions will
return to the original mode.

Summary of Contents for RP-9380

































Reviews: