16. MEMORY FUNCTION
17. MULTI-STAGE COOKING
This microwave oven can be set with 2 stages cooking at most. If one stage is defrost by
weight, it will placed at the first stage automatically. And only one stage is defrost.
Example: To defrost beef of 20 Oz first and then cook with 80% microwave power for 7 minutes.
1) Press "DEFROST" once to choose defrost by weight function, "dEF1" displays;
2) Press "2","0" in sequence to set weight;
3) Press "POWER" three times to 80% microwave power;
4) Press "7","0","0" in sequence to set cooking time;
5) Press "START/ +30 SEC.." to start cooking.
When defrost procedure finish, the buzzer sounds once, then the second stage begins.
Note: (1) Auto menu can't be set as one of the 2 stages.
(2) Defrost by time can be set as the one of stages.
(1)Press "MEMORY" to choose memory 1-3 procedure. The LED will display 1,2,3.
(2) If the procedure has been set, press " START/ +30 SEC." to use it. If not, continue to set
the procedure. Only one or two stages can be set.
(3) After finishing the setting, press "MEMORY" to save the procedure and turn back to the
waiting states.If press " START/ +30 SEC." ,it can save and operate the setting.
Note: Auto menu cooking cannot be set as memory procedure.
Example: to set the following procedure as the second memory, that is memory 2.
to cook the food with 80% microwave power for 3minutes and 20 seconds.
The steps are as follow:
1) In waiting states, press "MEMORY" twice,stop pressing until the screen displays "2".
2) Press "POWER" three times until "PL8" displays.
3) Press number keys "3","2","0" in order to input the cooking time.
4) Press "MEMORY" to save the setting. Buzzer sounds once then turn back to waiting
states. If you press "START/+30SEC." after the above step, the procedure will be
saved as the memory 2 and operated.
5) If the electricity is not cut off, the procedure will be saved all the time. If it is, the procedure
need to reset.
6) If you want to run the saved procedure, in waiting states, press "MEMORY" twice, screen
displays "2", then press "START/+30SEC." to run.
16
