background image

In case of smoke, strange noise or strange smell 
from the unit:

 Turn off the power switch immediately;

 Disconnect the power plug from the power outlet;

 Contact your dealer or service centre. Never 

   attempt to make repairs yourself because this 
   could be dangerous.

 
 
 

High Voltage 
Do not open

Risk of electronic shock, do not open.
Do not attempt to service this product yourself 
as opening or removing covers may expose 
you to dangerous voltage or other hazards. 
Refer all servicing to qualified service personnel.

CAUTION

Important Safety Instructions

Important Safety Instructions and Maintenance

Never push objects of any kind into the set 
through the cabinet slots as they may touch 
dangerous voltage points or short-circuit parts that 
could result in a fire or electric shock. Never spill 
liquid of any kind on the set. Use special caution 
in households where children are present. The 
apparatus is not suitable for children under 3-year 
to operate.

This product is equipped with a polarized plug (aplug 
having one blade wider than the other). 
This plug will fit into the power outlet only one way, 
this is a Safety feature. If you are unable to insert the 
plug fully into the outlet, try to reverse the plug and if 
the plug should still fail to fit, contact your electrical 
technician to replace your obsolete outlet. 
Do not defect the safety purpose of the polarized plug.
Power supply cords should be routed safety to 
prevent life and property from dangerous with 
damaged cord.
Mains plug is used as the disconnect device. It 
shall remain readily operable and should not be 
obstructed during intended use. To be completely 
disconnected the apparatus from supply mains, the 
mains plug of the apparatus shall be disconnected.

To reduce the risk of fire or electric shock, do not 
expose this product to rain or moisture. 
The apparatus shall not be exposed to dripping 
or splashing and no objects filled with liquids, 
such as vases, shall be placed on the apparatus. 

1

Summary of Contents for RLC2226



























Reviews: