RCA RCU800 - Universal Remote Control, User Manual

Page: 18 / 25

17
ON OFF TV
DBS•SAT AUX
VCR 1
VCR 2
DVD
CABLE AUDIO
ON OFF TV
DBS•SAT AUX
VCR 1
VCR 2
DVD
CABLE AUDIO
Programming With Code Search
Identifying Codes From Your Universal Remote
1. Manually turn on the device you wish to program.
2. Press and hold CODE SEARCH until the INDICATOR
LIGHT lights, then release CODE SEARCH.
3. Press and release the device button for the device you are
programming. The
INDICATOR LIGHT
will blink once,
then remain lit.
Note: For Aux programming (when not an audio code) press AUX followed by
the device button. Use
DBS•SAT
button for programming
CABLE.
4. Press and release
ON•OFF
until your device turns off.
Important: You may have to press ON¥OFF up to 200 times.
5. When your device turns off, press
ENTER
, the
INDICATOR LIGHT will turn off.
1. Press and hold CODE SEARCH until the INDICATOR
LIGHT lights, then release CODE SEARCH.
2. Press and release the device button for the code you are
retrieving. The Indicator Light will blink once.
Note: For AUX retrieving press AUX button followed by the device button.
3. Press and release CODE SEARCH . The INDICATOR
LIGHT will turn off.
4. Starting with 0 on the keypad, press the number
buttons in order (
0-9
) until the
INDICATOR LIGHT
blinks.
5. The number which causes the indicator light to blink is
the first digit of your code.
6. Repeat step 4 until you have retrieved all three
numbers in the code.
If your TV, VCR, DBS Satellite System, Cable Box or Audio System does not respond after you
have tried all the codes for your brand, or if your brand is not listed, try searching for your
code by following the steps below.
If you need to find the three-digit code for your TV, VCR, DBS System, Cable Box or Audio
System after your device is set-up use this procedure.
(OFF)
INDICATOR
LIGHT
ON OFF
ENTER
…
(OFF)
INDICATOR
LIGHT
0
9
CODE
SEARCH
CODE
SEARCH
CODE
SEARCH
(BLINK)
(BLINK)
RCU800manual 3/8/00 2:03 PM Page 18