RCA RCU410 - Universal Remote Control, User Manual

Page: 9 / 21

8
Programming For DBS
1. Manually turn on the DBS.
Find the three-digit code for
your DBS in the code list below.
2. Press and hold the CODE
SEARCH
button until the
INDICATOR LIGHT lights, then
release the CODE SEARCH
button.
3. Press and release the
DBS•CABLE button (The
INDICATOR LIGHT will blink
then remain lit).
4. Enter the code using the
Number Buttons.
After your code is entered, the
INDICATOR LIGHT will turn off.
5. Aim the remote at your DBS and
press the
ON•OFF
button. Your
DBS should turn off.
Note: If your DBS does not
respond, try all the codes for
your brand. If the codes do not
work, or your brand is not
listed, try the Code Search
method on page 11.
6. With your DBS on, press CH+ . If
the DBS responds, no further
programming is required.
7. Enter your code here
for easy reference.
DBS CODE
(BLINK)
INDICATOR
LIGHT
DBS•CABLE
ON OFF
(OFF)
CODE
SEARCH
Alphastar ..............................................079
Echostar (Dish System) ........................089
Echosphere (Dish Net)..........................078
GE ........................................071, 080, 081
Hitachi SYS I ........................................084
Hitachi SYS II........................................083
Hughes ................................083, 077, 090
Magnavox..............................................085
JVC ......................................................082
Panasonic ............................................075
Philips....................................................085
Primestar ..............................................076
Proscan ................................071, 080, 081
RCA ......................................071, 080, 081 Sony ......................................................072
Toshiba..................................................073
Uniden ..................................................086
DBS Code List
RCU410RS_manual 4/11/01 11:58 AM Page 9