To listen to the auxiliary player:
• If an auxiliary player (e.g. mp3
player) is connected, press
AUX
to
select AUX mode and start playback
on your auxiliary player.
To change or check the remaining
time in sleep mode:
• Press
SLEEP
once to check the
remaining sleep time. Press
SLEEP
repeatedly to select another sleep
time.
To cancel the sleep mode:
• If you decide to turn off the unit
sooner, press
SNOOZE
,
OFF
or press
SLEEP
repeatedly to select “OFF”.
SmartSnooze
TM
This operation allows extra sleep time
when the alarm sounds. The alarm will
be silenced by pressing
SNOOZE
,
VOL +
,
VOL –, SLEEP
or
NAP
until the snooze
period is over. Snooze function can be
used repeatedly up to 1 hour. After this,
the wake function will turn off until the
next day.
To set the “quiet” period with
Snooze:
While pressing
SNOOZE
, press
<<
or
>>
on the top of the unit to set the
“quiet” period from 1 to 30 minutes
(default: 9 minutes). Then release
SNOOZE
to save the setting.
Turn off the wake
function
To silence the wake function
momentarily:
• Press
SNOOZE
. The alarm will sound
again when the snooze period is
over. (refer to “SmartSnooze
TM
”).
OR
Sleep function
In the sleep mode, the radio, iPod or
AUX mode turns off automatically.
To set the sleep time:
1. Press
SLEEP
repeatedly to cycle
among the sleep time available
(90min, 60min, 30min, 15min and
OFF. 90min is the default setting).
• The
icon
fl ashes while selecting.
2. When the desired sleep time is
selected, release
SLEEP
and wait for
about 5 seconds, the sleep time is
now set.
• The
icon
lights on the display.
To listen to the radio:
• The radio turns on by default. If
not, press
RADIO
and select a radio
station as usual.
To listen to the iPod/iPhone:
•
Press
iPod
and then press
<<
or
>>
to select a fi le on the iPod/iPhone.
Playback will be in repeat all fi les
mode automatically.
• If iPod mode is selected in your last
sleep mode setting, the iPod/iPhone
will start to play, instead of the
radio.
• The radio will be played whenever
the iPod mode is selected but
without an iPod/iPhone connected.
If Waking to iPod/iPhone
(
,
)
is
selected:
3. Adjust the volume to your desired
level. The last played fi le on the
iPod/iPhone will be played when the
wake function activates.
4. Press
OFF
to turn off the unit.
Note:
If there is no iPod/iPhone
connected, the alarm tone will sound
instead even if Waking to iPod mode
is selected.
To stop the wake function:
• Press
OFF
. The alarm will be on
again the following day at the same
time.
OR
To disable the wake function
completely:
• Press
WAKE 1
or
WAKE 2
repeatedly until no corresponding
wake indicator ( ,
,
or ,
,
) shows on the display.
• When the wake
function activates, the
corresponding wake
icon will fl ash until the wake
function is turned off. The icon
will then stop fl ashing and keep
lighting up.
• When the AC power is
disconnected, all wake mode will
be reverted to alarm tone.
