13
7. Press
OPEN / CLOSE
. The disc tray closes. It takes a short while
for your unit to load the discs. After loading, the unit will
automatically start playback of the disc.
8. Press
PLAY
K
if playback does not start automatically.
9. Press
DISC1/DISC2/DISC3/DISC4/DISC5
or
DISC SKIP
to
select other discs to play.
Notes:
• During playback, you can add a disc to the disc tray without
interruption. If you press
OPEN/CLOSE
on the remote control
to open the disc tray, place the new disc on the tray, and press
OPEN/CLOSE
on the remote control again to close the disc tray.
The current disc playback will not be interrupted. If you press
OPEN/CLOSE
on the front panel rather than the remote, the
disc will stop playing.
• You can press
DISC SKIP
to choose a track on the current disc.
You also can press
DISC1/DISC2/DISC3/DISC4/DISC5
on the
remote control to choose the desired disc.
• When the disc stops for more than about 30 minutes, or if there
is no disc in the player, the system automatically enters Standby
mode.
Still Mode
Press
PAUSE II
.
II PAUSE
appears on the screen. To resume normal
playback, press
PLAY
K
. The sound is muted while paused.
Stopping Playback
1. Press
STOP
D
at the location where you want to interrupt
playback. To resume playback at the position where the disc was
stopped, press
PLAY
K
.
2. Press
STOP
D
twice. The unit’s memory is cleared. Press
PLAY
K
to reset the disc to the beginning.
Skipping to a Different Track (DVD/CD)
Press
F
SKIP
or
F
NEXT
once to skip to the start of the previous
track.
Press
SKIP
J
or
PREV
J
to skip to the next track.
For audio CD discs, use the number buttons (remote control only) to
jump straight to a specific track number.
Fast Forward/Fast Reverse (DVD/CD)
1. Press
F
SKIP
J
when a disc is playing. The disc plays forward
or backward at double speed. Each time
F
SKIP
J
is pressed,
the fast scan speed changes in sequence: x2, x4, x8, x20.
Note: You also can press
F
SKIP
J
repeatedly to select different
fast scan speeds.
2. Press
PLAY
K
to resume playback at normal speed.
Slow-Motion Play (DVD)
1. Press
E
SLOW
or
SLOW
F
in play mode. Two speeds are
available. Each time
E
SLOW
or
SLOW
F
is pressed, the speed
of slow-motion playback changes in the following sequence: x½
and x¼.
2. Press
PLAY
K
to return to normal playback speed.
Skip (Forward/Reverse) (DVD/CD)
While you are playing a disc, press
NEXT
J
on the remote or
SKIP
J
on the front panel to move to the beginning of the next
chapter or track. Press
PREV
F
on the remote or
SKIP
F
on the
front panel to move to the previous chapter or track and
automatically start playing it.
Zooming into an Image
1. While a disc is playing, press
ZOOM TV MODE
. While an image
is zoomed, you can use
d
,
e
,
f
,
or
g
to shift the view.
2. To return to the normal view, press
ZOOM TV MODE
until
J
OFF
appears on the display and the screen returns to normal.
3. When you reach the edge of the image, the display will not shift
anymore in that direction.
Angle Selection
Some DVDs contain scenes which have been shot from different
angles. For these discs, the same scene can be viewed from each of
these different angles. The recorded angles differ depending on the
disc used.
1. While you are playing a DVD with different angles recorded,
press
ANGLE
to view the number of the current angle.
2. Press
ANGLE
repeatedly to change the scene to the next
recorded angle.
Notes:
• About two seconds later, playback continues from the new angle
you selected.
• If no button is pressed within 10 seconds, playback continues
without changing the current angle.
• This function can only be used for discs on which scenes shot
from multiple angles have been recorded.
