manualshive.com logo in svg

RCA Professional series, Owner'S Manual, Page: 29 / 48

Share
Download
RCA Professional series Owner'S Manual Download Page 29

29

Playing Sources

Expanded

This mode is especially designed to give
sound depth to stereo sources. The overall
effect builds a dynamic and broad sound
space, allowing two-channel (stereo) signals
to imitate a five speaker sound. Use with
Dolby Pro Logic for a stereo surround effect.
You can also use with Dolby Digital sources
for a wider stereo field than the Standard
modes.

5-Channel Stereo

This can be selected to give multi-channel
sound to a stereo source, using all the
speakers in your setup.

Choosing the Input
Signal

You need to connect a component to both
analog and digital inputs on the back of the
receiver to select between input signals.

DOWN

STEREO

DIRECT

SIGNAL
SELECT

UP

ENTER

VOLUME

MULTI JOG

R

MONITOR

MULTI JOG

MIDNIGHT

LOUDNESS

TONE

SET UP

OSR

Press 

SIGNAL SELECT

 (front panel)

to select the input signal
corresponding to the source
component.

Each press switches between 

AUTO

,

DVD

5.1 ch

,

ANALOG

 and 

DIGITAL

. The default

is

AUTO

.

When set to 

DIGITAL

,

2

2

2

2

2

 DIGITAL

 lights

when a Dolby Digital signal is input, and

DTS

 lights when a DTS signal is input.

Notes:

• DVD 5.1 ch is only available when 

DVD/

LD

 is selected as the source.

• This receiver can only play back Dolby

Digital, PCM (32kHz, 44kHz, 48kHz,
and 96 kHz) and DTS digital signal
formats. With other digital signal
formats, set to 

ANALOG

.

• You may get digital noise when a LD or

CD player compatible with DTS is
playing an analog signal. To prevent
noise, make the proper digital
connections (see “Connecting Digital
Components” on page 15) and set the
signal input to 

DIGITAL

.

• Some DVD players do not output DTS

signals. For more details, refer to the
instruction manual supplied with your
DVD player.

• You can only select 

DIGITAL

 if the source

you selected is assigned to a digital input.
See page 36 for more on the digital input
settings.

Using Stereo Direct

When you select 

STEREO

 or 

DIRECT

, you

will hear the source through just the front
left and right speakers (and possibly your
subwoofer depending on your speaker
settings). Dolby Digital and DTS
multichannel sources are downmixed to
stereo. See the previous page for more on
these modes.

Press 

STEREO

 (

STEREO DIRECT

 on

the front panel) repeatedly to switch
between the two options.

31_5021.RCA.28.32

03.3.17, 8:25 PM

29

Summary of Contents for Professional series

















































Reviews:

No comments