background image

9

Setup and Connections

*

GUIDE Plus+ Gold is a trademark of Index System Inc. The GUIDE plus+ Gold system is manufactured under license from index Systems Inc.

Tip

You may want to use a piece of clear
plastic tape to temporarily affix the
controller’s node until you have completed
the interactive setup. That way you easily
move it if you have not placed it exactly
over the sensor.

Step 3: Connecting the IR

Controller

The IR (Infrared) Controller enables GUIDE Plus+ Gold

*

 to control your

VCR and cable box (if necessary) so that you can tune to television
channels and even start recording a program from the program guide.

After you have affixed the ends of the controller to the necessary devices
(VCR, or Cable box), you will use the on-screen interactive setup routine
for GUIDE Plus+ to test the connected devices.

Attaching the IR Controllers

Some components label the infrared remote sensor, and others do not. If
your component is labeled, affix the IR controller directly over the
sensor. For components that do not label the remote sensor, you need to
use to use the component’s remote control to locate the sensor.

1.

Hold the component’s remote control (not the remote that came
with your TV) so that it is touching the front of the component.

2.

Slowly move the remote over the front of the component while
pressing the remote power button on and off. (Be sure to press and
release the power button each time you move the remote. Holding
the button may not work.)

VCR

03

CHANNEL

Cable Box

The IR Controller is used to send commands
to your VCR and/or cable box.

3.

When the component turns off or on, you’ve located the sensor.

4.

Affix the controller’s node directly to the remote sensor.

SENSOR

VCR

03

CHANNEL

SENSOR

Connected to the TV

Attach to VCR

Attach to the Cable Box (if you have one)

otherwise, just leave it unattached

Summary of Contents for P46920BL

















































Reviews: