8.1
Signal - The heat alarm
has both a visible LED and
acoustic alarm signal.
8.2
Standby Mode - The
alarm goes to standby mode
once powered on, with the
LED flashing every 32 seconds
to indicate normal operation.
8
.3 Testing - Test the heat
alarm once a week to ensure
correct operation by
depressing and holding the
test button down until the
alarm sounds. This can be
performed from the floor using
a broom handle.
8.4 Alarm Mode - In alarm
mode, the heat alarm will emit
a loud sweeping sound pattern
of 3 beeps followed by a pause
and then repeating. This is
designed to alert occupants.
The LED will flash
simultaneously.
8
Fig.9
Fig.10
8 secs
32 secs
8
.5 Alarm Hush Mode -
If alarm activates when
there is no fire or
dangerous situation
present, the alarm siren
can be hushed by
depressing the Test/Hush
button. This will pause the
unit for approximately 10
minutes. During this time,
the LED will flash every 8
seconds indicating Hush
Mode. The heat alarm will
automatically reset after 10
minutes providing the air
temperature has reduced
to normal. However, if the
air temperature is still in
the heat sensitivity range
(see page 3), the alarm will
reactivate.
8.
6 Fault Mode - If the
alarm has developed a
fault, the battery level is
low, or the alarm has
reached the end-of-life
status, the alarm will chirp
every 32 seconds.
CHIRP
CHIRP
