PROBLEM
POSSIBLE CAUSE
“F–AND A NUMBER”
• If the time display flashes “F–and a number”, you have function error code.
FLASH IN THE DISPLAY
If a function error code appears during the self-cleaning cycle, check the oven door
latch. The latch may have been moved, even if only slightly, from the latched
position. Make sure the latch is moved to the right as far as it will go. Turn the
Oven Temperature knob to OFF. Allow the oven to cool for one hour. Put the
oven back into operation.
• Disconnect all power to the range for 5 minutes and then reconnect power.
If the failure code repeats, then call for service.
OVEN LIGHT
• Light bulb is loose or defective. Tighten or replace.
DOES NOT WORK
• Switch operating oven light is broken. Call for service.
OVEN WILL NOT WORK
• Plug on range is not completely inserted in the electrical outlet.
• The circuit breaker in your house has been tripped, or a fuse has been blown.
• Oven controls not properly set.
• Door accidentally locked during Baking or Broiling.
FOOD DOES NOT
• The Oven Temperature knob not set at BROIL.
BROIL PROPERLY
• Door not left open to the broil stop position as recommended.
• Improper shelf position being used. See the Broiling Guide.
• Food is being cooked on hot pan.
• Cookware is not suited for broiling.
• Low voltage. See the Broiling section.
• Aluminum foil used on the broil pan grid has not been fitted properly
and slit as recommended.
FOOD DOES NOT
• The Oven Temperature knob not set correctly.
ROAST OR BAKE
• Shelf position is incorrect. See the Roasting or Baking sections.
PROPERLY
• Oven shelf not level.
• Incorrect cookware or cookware of improper size is being used.
• Oven thermostat needs adjustment. See the Adjust the Oven Thermostat—
Do It Yourself section.
CLOCK AND TIMER
• Make sure the electrical plug is plugged into a live, properly grounded
DO NOT WORK
power outlet.
• Check for power outage.
• Clock may be in the Blank Out mode.
• See the Oven Control, Clock and Timer section of this guide.
OVEN WILL NOT
• Oven temperature is too high to set self-clean operation. Allow the range to cool
SELF-CLEAN
to room temperature and reset the controls.
• Oven Temperature knob not set to AUTO SELF CLEAN.
• Door latch handle not moved all the way to the right.
OVEN DOOR
• Turn the Oven Temperature knob to OFF. Allow the oven to cool.
ACCIDENTALLY LOCKED
Never force the door latch handle.
DURING COOKING
OVEN DOOR WILL
• Oven must cool below locking temperature.
NOT UNLOCK
OVEN NOT CLEAN
• Oven controls not set properly.
AFTER CLEAN CYCLE
• Heavily soiled ovens may need to self-clean again or for a longer period.
• Heavy spillovers should be cleaned before starting clean cycle.
AUTO SELF CLEAN
• The Oven Temperature knob is set at AUTO SELF CLEAN before the
LIGHT FLASHES
door latch handle is moved to the right.
OVEN ON AND AUTO
• The clean cycle is complete. Turn the Oven Temperature knob to OFF.
SELF CLEAN INDICATOR
LIGHTS FLASH
(continued next page)
QUESTIONS?
USE THIS PROBLEM SOLVER
Anti-T
ip Device
Pr
oblem Solver
33
