33
Features and menus
Advanced Convergence
After you have adjusted the color projection tubes as described
previously, you can make finer adjustments to specific areas of the screen
using the Advanced Convergence feature described below.
Note:
Before you use the advanced convergence feature, you must
complete the previous steps to align the tubes.
1.
Press the MENU button on the remote.
2.
Press 3 to select the
Screen
option.
3.
Press 4 to select the
Adjust Projection TV
option.
4.
Press 4 to select the
Advanced Convergence
option (the
Advanced Convergence
screen appears).
The green pattern is fixed. The red and blue patterns are adjusted to
the green pattern. The
Red Convergence
appears first by default.
5.
Colored cross-hairs show the current adjustment position on the
grid. To move the cross-hairs to a different position, use the
CH+/- buttons on the remote to move the cross-hair highlight up
and down, and the VOL+/- buttons to move it right and left.
6.
Use the arrow buttons to adjust the red pattern. Each press of
the arrow button makes a slight adjustment from the center of
the cross-hairs – you can press and hold the desired arrow
button to make a faster adjustment, and then make fine
adjustments with single presses of the arrow button.
7.
Press the INFO button to switch to Blue convergence and follow
the steps above to adjust the blue pattern.
8.
Press OK to exit. You will be asked if you want to save the
adjustments.
Yes
Saves adjustments.
No
Returns to the
Advanced Convergence
screen allowing
further adjustments.
Clear
Exits screen without making any changes.
Channel Menu
Signal Type
Displays a choice list that lets you select the current
antenna type. This option does not appear when the GUIDE Plus+ system
is set up.
UHF/VHF Antenna
Choose this if you are currently using an off-air
antenna for TV signals.
Cable TV
Choose this if you are currently using cable or a cable box
for TV signals.
ADJUST PROJECTION TV
1 Green Centering
2 Blue Convergence
3 Red Convergence
4 Advanced Convergence
0 Exit
MAIN MENU
1 Audio
2 Picture Quality
3 Screen
4 Channel
5 Time
6 Parental Controls
7 GUIDE Plus+ Menu
8 Setup
0 Exit
CHANNEL
1 Signal Type
2 Auto Channel Search
3 List and Labels
4 Auto Tuning
0 Exit
ADVANCED RED CONVERGENCE
OK
Exit
CLEAR
Cancel & Exit
VOL & CH Move on Grid
Arrows
Adjust Red to Grid
INFO
Switch to Blue
