42
Features and Controls
Schedule
The Schedule menu lets you create timers for either viewing or recording
programs. The GUIDE Plus+ system allows one-button recording if you
have connected the IR controller to your VCR. See the Setup and
Connections section of this manual for more details on connecting the IR
controller.
To schedule a program to watch or record:
1.
Press GUIDE to bring up the GUIDE Plus+ system.
2.
Highlight a program within the Channel listing.
3.
Select Watch or Record from the Action buttons bar. The timer is
then automatically logged into the Schedule menu.
4.
If you select Record, make sure to place a blank tape in the VCR and
leave the VCR off.
The program information window will display a confirmation when you
have successfully created a timer to watch or record. If you have selected
two programs to watch or record which begin at the same time or
overlap, you will receive a timer conflict message. The GUIDE Plus+
system will not schedule a conflicting timer, therefore you must choose
between the two programs.
To remove or change the frequency (daily, once, or weekly) of a
scheduled event, access the Schedule Menu from the Menu bar.
1.
Press GUIDE to bring up the GUIDE Plus+ system.
2.
Press MENU to highlight the Menu bar.
3.
Use the arrows to highlight the Schedule menu selection.
4.
Use the up and down arrows to highlight the program you want to
edit. Then use the Schedule Menu Action Buttons as described in the
next section.
Schedule Menu Action Buttons
When viewing the Schedule menu the following Action buttons will
appear on the bar:
•
Remove
Highlight the Watch or Record timer you wish to remove
from the schedule and press 1 on the remote.
•
Change
Highlight the Watch or Record timer you wish to change
and press 3 on the remote to toggle the frequency between the
following choices:
DAILY
records the same program each day Monday through Friday.
ONCE
records only on that day.
WEEKLY
records the program each week at the same time.
Schedule Menu
Action Buttons
Schedule
Menu
Selection
