Using the DVR10
12 Chapter 2
Illustrations contained in this document are for representation only.
Using the DVR10
Chapter 2
13
Illustrations contained in this document are for representation only.
You can use the Jump Ahead feature to jump quickly 30 seconds ahead during live or recorded
shows. Jump Ahead is perfect for jumping past programs and undesired scenes without having to
watch them as you would using Fast Forward. Jump Ahead can only be used during live broadcasts
if the show is being recorded and you are watching the show delayed by more than 30 seconds.
To use Instant Replay while watching a recorded show:
• Press Left Arrow on the TV’s remote control to replay the
previous 7 seconds in the recording.
To use Jump Ahead while watching a show:
• Press Right Arrow on the TV’s remote control to just ahead 30
seconds into a recording.
• Press repeatedly to leap ahead in 30-second intervals.
Next and Previous Track
Next and Previous Track features allow you to jump quickly to the
next or previously recorded program on the DVR10. Press the Up
Arrow to skip to the next track. Press the Down Arrow to skip to
the previous track. The track being played and the total number of
tracks recorded is shown in the channel banner when the track is
changed. (See below.)
Note: Use CH+ to tune to different subchannels (if available) on each track.
Program Information
At any time while recording a digital program or playing back a recorded program, you can press
the INFO button on your remote control to get more information from the channel banner.
The program name, channel, track number, 1394 recording device, and elapsed time for 1394
recordings appear in the channel banner.
If an icon in the channel banner is grayed out (dim), the feature is not available. The following list
describes the items on the Channel Banner screen applicable to the DVR10. Other displays that are
not described here are self-explanatory or further explained in the television manual.
Subchannel - Sub-channel and the station call letters, if available. For the different
sub-channels, press the CH+ or CH-.
Note: Digital channels are often noted by the use of a sub-channel. (Channel 2 may denote an analog
channel while channel 2-1 is often a digital version of the channel 2 broadcast.)