Chapter 1: Connections and Setup
Chapter 1
9
Illustrations contained in this document are for representation only.
Connecting a Secondary DSL Decoder or Other Device with Home PNA or Ethernet
1. Connect the Primary DSL Decoder to the Secondary DSL Decoder
A.
Connect one end of the ethernet cable to the ETHERNET jack on the primary DSL box and the
other end to the ETHERNET jack on the secondary box.
– OR –
B.
Connect one end of the Home PNA cable to the HOME NETWORK PHONE LINE IN jack on the
primay DSL box and the other end to the HOME NETWORK PHONE LINE IN jack on the secondary
box.
Notes:
•
These connections can also be from the wall to the primary box or secondary box, depending how your
network is set up.
•
Make sure the Ethernet cable is straight-wired (not “null” or crossover-wired). However, you ‘ll need a
crossover-type cable if you are connecting the decoder to a hub, or a hub within a port switch that provides the
same function.
2. Connect the DSL line to the DSL Modem
Connect the DSL line from the wall jack to the DSL LINE IN jack on your modem.
3. Plug the power cord into the AC outlet.
Go To Page 10
SECONDARY
DSL DECODER
From DSL or other Broadband Connection
PRIMARY DSL
DECODER
IN FROM
ANTENNA
AC INLET~
OUT TO TV
RF COAXIAL
COMPONENT VIDEO OUT
Y
Pb
Pr
AUDIO
OUT
DIGITAL
AUDIO OUT
OPTICAL
COAXIAL
R
L
R
L
RECORDER
CONTROL
SMART CARD
VIDEO
OUT
S-VIDEO
OUT
NETWORK
ETHERNET
PHONE
LINE IN
HPNA
DSL
LINE IN
IN FROM
ANTENNA
AC INLET~
OUT TO TV
RF COAXIAL
COMPONENT VIDEO OUT
Y
Pb
Pr
AUDIO
OUT
DIGITAL
AUDIO OUT
OPTICAL
COAXIAL
R
L
R
L
RECORDER
CONTROL
SMART CARD
VIDEO
OUT
S-VIDEO
OUT
NETWORK
ETHERNET
PHONE
LINE IN
HPNA
DSL
LINE IN
Ethernet OR Home PNA
connection (not both)
1A
1B
2
