RCA DRD703RA Owner'S Manual Download Page 58

Page: 58 / 79

Reference

Controls and Buttons

This part of the Reference sections discusses the controls and
buttons located on the receiver and the remote control.

Front Panel Controls

ON/OFF

Turns the DSS

receiver’s power on or off.

DISPLAY

Brings up the on-screen channel marker.

ANTENNA

Switches the source of the video signal from

DSS

satellite signals to an off-air antenna or cable

signal.

ARROWS

Press the navigation arrows to move the on-

screen highlight up, down, left, or right. Using the
arrows to highlight a menu item is also called
“pointing.”

MENU•SELECT

Brings up the Main menu. If you are

already in the menu system, press MENU•SELECT to select
a highlighted choice.

ACCESS CARD

Identifies you to your program providers.

The DSS

system requires a valid access card.

The Access Card door slides open so that you can replace the card when necessary.

ON/OFF

DISPLAY

ANTENNA

SELECT

Summary of Contents for DRD703RA
















































































Search results

Summary of Contents for DRD703RA

Reviews:

Brands by name

Popular brands

RCA DRD703RA, Owner'S Manual

Search results

Summary of Contents for DRD703RA

Reviews:

Brands by name

Popular brands