manualshive.com logo in svg

RCA DRD505RB, User Manual, Page: 61 / 80

Share
Download
RCA DRD505RB User Manual Download Page 61

Reference

59

AUX RF ANT IN

OUT

TO
TV

IN

FROM

ANT

S-VIDEO

VIDEO

R

L

AUDIO

WIDE BAND DATA

REMOTE IN

SATELLITE IN

PHONE JACK

CH 4

CH 3

VCR CONTROL

LOW SPEED DATA

Back Panel Controls

IN FROM ANT

  Use to connect an off-air antenna or cable TV signal

to the DSS

®

 system.

OUT TO TV

  Use to connect the DSS

®

 receiver to your TV. However, if

your TV has audio/video jacks, you should use those jacks to get
better picture and sound quality.

CH3/CH4 SWITCH

  If a coaxial cable is used to connect the DSS

®

receiver to your TV, you must set the CH3/CH4 SWITCH. For example,
to see the DSS

®

 signal on TV channel 3, set the switch to 3.

S-VIDEO

  Provides the best picture quality. If your TV has S-VIDEO

capability, use this jack along with the audio/video jacks to connect
the DSS

®

 receiver to your TV.

VIDEO

  Provides better picture quality than the OUT TO TV jack. If

your TV has audio/video capability, use this jack to connect the DSS

®

receiver to your TV. You must also connect the AUDIO jacks.

AUDIO (R and L)

  Provide better sound quality than the OUT TO TV

jack. If your TV has audio/video capability, use these jacks to connect
the DSS

®

 receiver to your TV. You must also connect the VIDEO jack.

AUX RF ANT IN

  Use to connect an optional RF antenna for RF

remote signals. Connecting an antenna extends the remote’s range.

WIDE BAND DATA PORT

  This port allows you to connect the DSS

®

system to future services and accessories. A shielded cable and
additional hardware may be required.

LOW SPEED DATA PORT  

this port allows you to connect the DSS

®

system to  accessories, such as the Home Control base module.

SATELLITE IN

  Use to connect the DSS

®

 receiver to the satellite dish.

PHONE JACK

  Use to connect a phone line to the DSS

®

 receiver. The

DSS

®

 system requires a phone line connection to periodically call out

to program providers.

VCR CONTROL

  Allows the receiver to control your VCR.

REMOTE IN

  Use in conjunction with a remote control signal sender.

Summary of Contents for DRD505RB

















































































Reviews:

No comments