manualshive.com logo in svg

RCA DRD503RB, User Manual, Page: 54 / 80

Share
Download
RCA DRD503RB User Manual Download Page 54

The Menu System

52

Home Control

Home Control lets you remotely control several lamps and
appliances through your DSS

®

 receiver. To control these devices,

you must connect a Home Control Data Interface to the receiver
and a remote module to the device you want to control. These
devices are available as accessories sold through your digital
satellite dealer or the accessories order form at the back of this
book.

Once you have connected your Home Control devices, you can
control them through the on-screen menus.

Home Control setup

The Home Control Data Interface connects to the LOW SPEED
DATA port on the back of the receiver. Once connected, you
must tell the receiver to use this port for Home Control.

1.

Press MENU•SELECT to bring up the Main menu.

2.

Point to and select Options.

3.

Point to and select System Options.

4.

Point to and select Data Port and choose Home Control as
the default setting

Device Setup

1.

From the Main menu select Home Control.

Home Control can control several devices.

LOW SPEED DATA PORT

Summary of Contents for DRD503RB

















































































Reviews:

No comments