Fast Forward / Fast Reverse
1. Press the
SEARCH
or
SEARCH
button when a disc is playing. Each time you press the
SEARCH
or
SEARCH
button, the playback speed changes in the following sequence:
2. Press the button twice when you reach the desired point to resume normal playback.
Notes:
• The DVD player mutes sound and subtitles during reverse and forward scan of DVDs.
• The fast playback speed may differ depending on the disc.
Skip (Forward / Reverse)
• Press the
NEXT
button to advance titles, chapters/tracks.
• Press the
PREV
button to go back to current or previous titles, chapters/tracks.
System Setup
1. Press the
MENU
button on the unit in stop mode (when disc
is not playing).
2. Press the
/
button to select System
Menu
.
3. Press the
/
button to select the option (TV Display or
Default), then press the
button.
4. Press the
/
button to adjust the settings, then press
the button to confirm.
5. Repeat steps 3 and 4 to adjust other options. Press the
button to return to the previous menu.
6. Press the
MENU
button to exit the menu.
TV Display
Default
Wide
No
Go To System Menu
- - System Menu - -
System
Language
Video
This owner’s manual explains the basic instructions for operating this unit. Some DVDs are produced in a
manner that allows specific or limited operation during playback. Therefore, this unit may not respond to
all operating commands. THIS IS NOT A DEFECT. Please refer to the instructions accompanying the specific
DVD in question for more information about the options available on that DVD.
“ ” may appear on the screen during operation. A “ ” means the desired operation is not permitted
by the unit or disc.
Playing a Disc
1. Slide the
CHARGE
/
STANDBY
/
ON
switch on the left side of the unit to the ON position.
See Customizing the function settings before proceeding to step 2.
2. Press the
OPEN
knob to open the disc door.
3. Hold the disc by its sides and carefully place it onto the spindle with the label side facing up, pushing
gently until you hear a “click”.
4. Close the disc door. It takes a short while for your unit to load the disc. After loading, the unit will
automatically bring you to the main menu of the DVD or start playing the DVD.
5. If the unit does not automatically start playing the DVD, press the
button.
P
ausing Playback (Still Mode)
Press the button. To resume normal playback, press the button again.
Stopping Playback
Press the STOP button at the location where you want to interrupt playback. To resume playback at the
position where the disc was stopped, press the button.
If you press the
STOP
button twice, the unit’s memory will be cleared and pressing the button will reset the
DVD to the beginning.
Playing a Disc (Basic Playback)
Customizing the Function Settings
Viewing JPEG Files
This unit can play JPEG files recorded on a CD-R or CD-ROM disc (CD-RW is not recommended).
Viewing JPEG Files
1. Press the
OPEN
knob to open the disc door.
2. Hold a JPEG file disc by its edges and gently push it onto
the spindle with the label side facing up until you hear a
“click”.
3. Close the disc door. The JPEG files on the disc will be
displayed one by one automatically. If the disc does not play
automatically, press the button.
4. Press the
STOP
button to display a folder list. Press the
/
button to highlight a JPEG file to play. Press the
button to start playback.
Notes:
• You can press the
button to freeze the picture. Press the button again to resume picture slide show.
• You can press the
STOP
button to quit playback.
• You can press the
PREV
or
NEXT
button to change the picture.
• Some discs may not permit this operation.
E - 13
E - 17
E - 21
E - 12
E - 16
E - 20
E - 14
E - 18
E - 19
E - 22
E - 15
E - 19
Language Setup
1. Press the
MENU
button in stop mode (when disc is not
playing).
2. Press the
button to select Language Menu.
3. Press the
/
button to select the option (Player Menu,
Audio, Subtitle or Disc Menu), then press the
button.
4. Press the
/
button to select your preferred language,
then press the button to confirm.
5. Repeat steps 3 and 4 to adjust other options. Press the
button to return to the previous menu.
6. Press the
MENU
button to exit the menu.
Notes:
• Some DVDs may not play in the audio language you selected. A prior language may be programmed on the disc.
• Some DVDs may be set to display subtitles in a language other than the one you selected. A prior subtitle
language may be programmed on the disc.
• Some DVDs allow you to change subtitle selections using the disc menu only. If this is the case, press the
MENU
button and choose the appropriate subtitle language from the selection on the disc menu.
• Some DVDs may not include your pre-selected language. In this case, the DVD player automatically displays
disc menus consistent with the disc's initial language setting.
Go To Language Menu
- - Language Menu - -
System
Language
Video
Player Menu
Audio
Subtitle
Disc Menu
Eng
Eng
Off
Eng
Customizing the Function Settings
Troubleshooting Guide
Printed in China
811-937191W010
Symptom Cause (and remedy)
No power.
The remote
control does
not function.
No sound or
only a very
low-level
sound is
heard.
No picture.
The picture is
not clear.
Severe hum or
noise is heard.
The disc does
not play.
• Ensure the AC power adapter is connected.
• The unit is not turned on.
• Make sure the infrared remote sensor is not blocked.
• Make sure the plastic sheet has been removed from the remote control.
• Point the remote directly at the infrared remote sensor on the unit.
• Replace the battery in the remote control with a new one.
• The volume control is located on the side of the unit – please try adjusting this.
• The system is in pause mode. Press the
button to return to normal play mode.
• The unit is in fast-forward or fast-reverse mode. Press the
button to return to normal play
mode.
• Make sure the AUDIO/VIDEO output connections are correct.
• The DTS DVD cannot be decoded to have speaker output.
• The unit is too hot; shut off the unit for 30 minutes to cool it down.
• The region number of the disc doesn't match the region
number of this unit.
• Clean the disc.
• The disc is scratched.
• Adjust the LCD's brightness and contrast using the
MENU
button on the remote control.
• The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.
• Clean the disc.
• There is no disc inside (“No Disc” appears on the screen).
• Insert the disc correctly with the playback side facing down.
• Clean the disc.
• A non-NTSC disc has been inserted. The unit and disc region number are incompatible.
• Condensation may have formed inside the unit due to a sudden change in temperature.
Wait about an hour for it to clear and try again.
Need More Help?
Please visit online help at http://www.RCAav.com
Video Setup
1. Press the
MENU
button in stop mode (when disc is not
playing).
2. Press the
/
button to select Video Menu.
3. Press the
/
button to select the option (Brightness or
Contrast), then press the
button.
4. Press the
/
button to adjust the setting, then press
the button to confirm.
5. Repeat steps 3 and 4 to adjust other options. Press the
button to return to the previous menu.
6. Press the
MENU
button to exit the menu.
Brightness
Contrast
To
- -
- -
Language
00
00
System
Video
Go To Video Menu
Video Menu
Customizing the Function Settings
Default
It takes 3-5 seconds to reset the DVD settings to the factory default.
TV Display
Pan Scan
• When wide-screen video is played, this mode clips the right and left sides of the
image so that it can be viewed on a conventional screen.
• Some wide-screen DVDs that do not permit Pan Scan mode playback are
automatically played in letterbox mode (black bands that appear at the top and
bottom of the screen).
Letter Box
• When wide-screen video is played in this mode on a conventional screen, black
bands appear at the top and bottom of the screen.
Wide Screen
• This is the correct mode for playing wide-screen videos on the unit screen or
other external wide-screens.
Notes:
• The displayable picture size is preset on the DVD. Therefore the playback picture
of some DVDs may not conform to the picture size selected.
• When you play DVDs recorded in the 4:3 aspect ratio, the playback picture will
always appear in the 4:3 aspect ratio regardless of the TV display setting.
• Select Wide Screen to conform the LCD screen on the unit. Always be sure that
your TV display conforms to the actual TV in use if you connect the unit to a TV.
Wide Screen
Letter Box
Cut off when a wide-screen
video image is played.
Pan Scan
Maintenance
Cleaning the Disc
A defective or soiled disc inserted into the unit can cause sound to drop out during playback.
Handle the disc by holding its inner and outer edges.
• Do NOT touch the surface of the unlabeled side of the disc.
• Do NOT stick paper or tape on the surface.
• Do NOT expose the disc to direct sunlight or excessive heat.
• Clean the disc before playback. Wipe the disc from the center outward with a cleaning cloth.
• NEVER use solvents such as benzine or alcohol to clean the disc.
• Do NOT use irregular shaped discs (example: heart shaped, octagonal, etc.). They may cause malfunctions.
Cleaning the Unit
• Be sure to turn the unit off and disconnect the AC power adapter before cleaning the unit.
• Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth that has
been dipped in a weak soap-and-water solution and wrung out thoroughly, then wipe with a dry cloth.
• Never use alcohol, benzine, thinner, cleaning fluid or other chemicals. Do NOT use compressed air to
remove dust.
Important Note
• Before transporting the unit, remove the disc from the disc compartment.
Limited warranty
AVC MULTIMEDIA (“AVC”)
makes the following limited warranty. This limited warranty extend to the original
consumer purchaser and is limited to non-commercial use of the product.
One Year Parts & Labor Warranty
AVC
products purchased in the United States or Canada are warranted to be free from defects in materials or
workmanship for a period of one year from the date of their original retail purchase. If the unit fails to conform to
this warranty, we will service the product using new or refurbished parts and products, at
AVC
’s sole discretion.
During a period of one year from the effective warranty date,
AVC
will provide, when needed, service labor to
repair a manufacturing defect at its designated Service Center. To obtain warranty service in the United States or
Canada, you must first call our
Customer Support Center at 1-800-506-5746 or 1-877-252-6873, during the
hours listed in the box on the right.
The determination of service will be made by
AVC
Customer Support.
PLEASE
DO NOT RETURN YOUR UNIT TO AVC WITHOUT PRIOR AUTHORIZATION.
New or remanufactured replacements
for defective parts or products will be used for repairs by
AVC
at its designated Service Center for one year from the
effective warranty date. Such replacement parts or products are warranted for an additional one year from the date
of repair or replacement. The Customer will be required to ship the unit to the Service Center indicated at the time
Customer Support is contacted to make the necessary repairs. The customer is responsible for all transportation
charges to the service facility.
Packaging and Shipping Instruction
When you send the product to the
AVC
service facility you must use the original carton box and packing material or an
equivalent as designated by
AVC
.
LIMITED WARRANTY
Your Responsibility
1) You must retain the original sale receipt to provide proof of purchase.
2) These warranties are effective only if the product is purchased and operated in the United States or Canada.
3) Warranties extend only to defects in material or workmanship, and do not extend to any product or parts which
have been lost or discarded, or damage to product or parts caused by misuse, accident, improper operation or
maintenance, or use in violation of instructions provided with the product, or to product which has been altered or
modified without authorization of
AVC
, or to products or parts thereof which have had the serial number removed
or changed.
Out of Warranty
All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular
purpose, are expressly limited to the duration of the limited warranties set forth above. With the exception of
any warranties implied by state law as hereby limited, the foregoing warranty is exclusive and in lieu of all other
warranties, guarantees, agreements and similar obligations of manufacturer or seller with respect to the repair or
replacement of any parts. In no event shall
AVC
be liable for consequential or incidental damages.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these
warranties in any manner whatsoever. The time within action must be commenced to enforce any obligation of
AVC
arising under the warranty or under any statute, or law of the United States or Canada or any state thereof, is
hereby limited to one year from the date of purchase. This limitation does not apply to implied warranties arising
under state law.
This warranty gives you specific legal rights and you may also have other rights, which may vary, from state to state.
Some states do not allow limitation on how long an implied warranty lasts, when an action may be brought, or the
exclusion or limitation of incidental or consequential damages, so the above provisions may not apply to you.
For more information on other products and services, please visit our web site at
www.RCAav.com
Important:
Also keep your "Bill of Sale" as proof of purchase.
Model no...................................................................... Product name
.......................................................................
Type of set .......................................................................... Serial no.. .................................................................................
Invoice no. .......................................................................... Date purchased. ....................................................................
Dealer name ......................................................................
FOR SERVICE AND REPAIR, PLEASE VISIT
www.RCAav.com
Specifications and external appearance are subject to change without notice.
© 2010 AVC MULTIMEDIA
In the event your product requires repair after the limited warranty period has expired, please contact our
Customer Support Center at
1-800-506-5746
,
1-877-252-6873 or
www.RCAav.com
Hours: Monday–Thursday: 9am–7pm, Friday: 9am–5pm, Saturday: 9am–NOON Eastern time.
Important:
You are responsible for any transportation, shipping or insurance relative to the return of product to our
Product Returns Center.
