Chapter 2: Advanced Information
Illustrations contained in this document are for representation only.
25
Ethernet Connection to One Computer
Make the connections to the modem in the following sequence:
1.
Connect one end of the coaxial cable to the cable connection in the wall, and the other end
to the CABLE jack on the EMTA.
2.
Connect the plug from the AC power supply into the POWER AC ADAPTER jack on the EMTA,
and plug the power supply into an AC outlet.
3.
Connect one end of the Ethernet cable (straight-wired, see below) to the Ethernet port on the
back of your computer, and the other end to the ETHERNET port on the EMTA.
Make sure that the Ethernet cable is straight-wired (not “null” or crossover-wired). However,
you will need a crossover-type cable if you are connecting the modem to a hub, or a hub
within a port switch that provides the same function.
Note: Use only the power
supply that accompanied this
unit. Using other adapters
may damage the unit.
Fig.3: Ethernet Connection
