Chapter 1
9
Chapter 1: Connections and Setup
Your PC: Installing a PC Network Card
If your PC does not already support Ethernet or USB, you must install a network interface card.
Following is an example setup procedure:
1. Install an Ethernet card on your motherboard, following the card’s directions.
2. Power up your PC and follow the
Add New Hardware Wizard
’s instructions to install the
driver. When asked to restart your computer at the end of the installation, click
Yes
.
3. After restarting the system, right-click
My Computer
on the desktop, select
Properties
, click
the
Device Manager
tab, and then double-click
Network adapters
to confirm that the
Ethernet driver is properly installed.
16096620 DCW615. 01 Connect
3/21/03, 4:58 PM
9