13
Programming The AUX Button For Universal Satellite Or RCA Audio
You can assign any one of the following devices to the AUX button:
A second TV, VCR, Satellite System, Cable Box or RCA Audio
1. Manually turn on the device you wish to control.
Find the four digit code for the device you wish to
program in the code list.
2. Press and hold the
AUX
button. While holding the
device button, press the first number of the your device
code. If the first number is valid the LED will turn off.
3. Enter the code using the Number Buttons.
After your code is entered, the LED light will turn on to
verify if the code entered is valid. Release the device
button. The LED will go off.
Note: If the code is invalid, the LED light will flash four times and abort the
remote back to normal operation maintaining the current code.
4. Aim the remote at the device you wish to control and
press the
ON•OFF
button. The device should turn off.
Note: If the device you have programmed does not respond, try all the
codes for your brand. If the codes do not work, or your brand is not listed,
try the Auto Code Search method on page 5.
5. With your device on, press
CH+ (Channel UP)
or
ON•OFF
button. If the device responds, no further
programming is required.
6. Enter your code and the check the type of device you
programmed here for easy reference.
(OFF)
(OFF)
Device
Page
TV . . . . . . . . . . . . . . . .8-9
VCR . . . . . . . . . . . . . .10-11
Cable Box . . . . . . . . . .12
RCA Audio . . . . . . . .14
Satellite System . . . . .14
OR
AUX CODE
TV VCR CABLE SAT AUDIO
✓
DBS_D770manual.qdx 3/30/01 8:49 AM Page 14