background image

Chapter 2

15

Using the Remote Control

Graphics contained within this publication are for representation only.

Important

You must continue pressing the component button while
you enter the code.

Let’s say you have a Zenith VCR. To program the universal
remote to operate the VCR, you would:

Press and hold the VCR1 button while you enter the first
code listed for Zenith in the VCR Codes column.

Release the VCR1 button. Press ON•OFF to see if the VCR
responds. If it doesn’t, follow the same steps, but enter the
second code for Zenith VCRs instead of the first.

Note

Some of the remote’s buttons might operate differently for
other components, especially when you’re using another
component’s menu system.

Using Direct Entry

1. Turn on the component to be programmed.

2. Look up the brand and code number(s) for the component on the code list in this section.

3. Point the remote at the component.

4. Press and hold the component button you want to program on the remote.

5. Enter the 4-digit code from the remote control code list on the following pages. If the

indicator flashes, you have either entered an invalid code or the button isn’t programmable.

6. Release the component button, and then press ON•OFF to see if the component responds to

the command. If it doesn’t, try pressing the component button and then ON•OFF again.

If you get no response, repeat these steps using the next code listed for your brand, until the
component responds to the remote commands.

If you try all the codes for your component brand and none work, try the automatic code
search method. If automatic code search doesn’t find the code, the remote is not compatible
with your component.

How to Use the Remote After You’ve Programmed It

Because this universal remote can control several different components (TV, DVD, VCR, satellite
receiver, etc.) it uses operational modes triggered by the component buttons. For example, if you
want the remote to control the TV, you would press the TV button to put the remote into TV
mode before you could control the TV.

1. Press the appropriate component button (DVD, TV, VCR1, VCR2, SAT•CABLE, AUX) to set the

remote to control the component.

2. Press ON•OFF to turn the component ON or OFF.

3. Use the remote buttons that apply to that component.

Notes:

The remote may not be compatible with all brands and models of components. It also may not
operate all functions of the remote that came with your component.

If you keep pressing buttons and nothing happens, the remote is probably in the wrong mode. You
must press the component button that matches the component you want to operate (i.e., if you want
to operate the VCR, press VCR1 on the remote control to put the remote in VCR mode.)

Remote Control Codes

VCR Codes

Programmable for VCR1, VCR2, and AUX
buttons.

Admiral .............................................................................. 2132
Adventura .......................................................................... 2026
Aiko .................................................................................... 2027
Aiwa ................................................................................... 2026
Akai ........... 2003, 2004, 2005, 2007, 2008, 2111, 2112, 2113
American High .................................................................. 2021
Asha ................................................................................... 2013
Audio Dynamics .................................................... 2009, 2010
Audiovox ........................................................................... 2014
Bell & Howell ..................................................................... 2011
Beaumark ........................................................................... 2013
Broksonic ................................................................ 2012, 2025
Calix ................................................................................... 2014
Candle ............................................... 2013, 2014, 2015, 2016,

....................................................................... 2017, 2018, 2019

Canon ............................................................ 2021, 2022, 2114
Capehart ................................................................... 2020, 2110
Carver ................................................................................. 2062
CCE .......................................................................... 2027, 2061
Citizen .................................................................... 2013, 2014,

....................................... 2015, 2016, 2017, 2018, 2019, 2027

Colortyme .......................................................................... 2009
Colt ..................................................................................... 2061
Craig ................................................... 2013, 2014, 2023, 2061
Curtis-Mathes ............................................. 2000, 2009, 2013,

............................. 2016, 2018, 2021, 2022, 2024, 2115, 2131

Cybernex ........................................................................... 2013

Daewoo ...... 2015, 2017, 2019, 2025, 2026, 2027, 2028, 2110
Daytron ................................................................................. 2110
DBX ............................................................................ 2009, 2010
Dimensia .................................................................... 2000, 2131
Dynatech .............................................................................. 2026
Electrohome ............................................................. 2014, 2029
Electrophonic ...................................................................... 2014
Emerson ......................... 2012, 2014, 2015, 2021, 2024, 2025,

..........2026, 2029, 2030, 2031, 2032, 2033, 2034,2035,
2036, ..........2037, 2038, 2039, 2040, 2041, 2042,2044,

2045, 2046, ............................................2047, 2065, 2113,

2116, 2117, 2130

Fisher ......... 2011, 2023, 2048, 2049, 2050, 2051, 2052, 2118
Fuji ............................................................................. 2021, 2119
Funai .................................................................................... 2026
Garrard ................................................................................. 2026
GE ................................................................... 2000, 2001, 2013,

......................................... 2021, 2022, 2053, 2115, 2120, 2131

Goldstar ............................................... 2009, 2014, 2018, 2054
Gradiente ............................................................................. 2026
Harley Davidson ................................................................. 2026
Harman Kardon .................................................................. 2009
Harwood .............................................................................. 2061
Headquarter .......................................................................... 2011
Hitachi ..................................................................... 2055, 2056,

..................................................... 2057, 2107, 2111, 2120, 2122

Hi-Q ...................................................................................... 2023
Instant Replay ..................................................................... 2021
JCL ........................................................................................ 2021
JC Penney ............................................ 2009, 2010, 2011, 2013,

.................................................. 2014, 2021, 2022, 2055, 2056,
.................................................... 2058, 2059, 2060, 2107, 2118

Jensen ............................................................. 2055, 2056, 2111
JVC ................................... 2009, 2010, 2011, 2018, 2111, 2123
Kenwood ................ 2009, 2010, 2011, 2016, 2018, 2111, 2123
KLH ....................................................................................... 2061

Kodak ................................................................. 2014, 2021
Lloyd ............................................................................ 2026
Logik ............................................................................ 2061
LXI ................................................................................ 2014
Magnavox ............................................. 2021, 2022, 2062,

............................................ 2063, 2104, 2105, 2108, 2124

Magnin ......................................................................... 2013
Marantz ........ 2009, 2010, 2011, 2016, 2018, 2021, 2062,

2064

Marta ............................................................................ 2014
Masushita .................................................................... 2021
Mei ............................................................................... 2021
Memorex ...... 2011, 2013, 2014, 2021, 2023, 2026, 2104,

2132

MGA ........................................................ 2029, 2065, 2113
MGN Technology ........................................................ 2013
Midland ........................................................................ 2053
Minolta ................................................... 2055, 2056, 2107
Mitsubishi .. 2029, 2055, 2056, 2065, 2066, 2067, 2068,

.  2068, 2070, 2071, 2072, 2073, 2074, 2106, 2113, 2123

Montgomery Ward ........................................... 2075, 2132
Motorola ............................................................ 2021, 2132
MTC .................................................................... 2013, 2126
Multitech ........................... 2013, 2016, 2026, 2053, 2061
NEC ...................................... 2009, 2010, 2011,2016, 2018,

.................................. 2064, 2076, 2078, 2079, 2111, 2123

Nikko ............................................................................ 2014
Noblex .......................................................................... 2013
Olympus ....................................................................... 2021
Optimus .............................................................. 2014, 2132
Optonica ...................................................................... 2096
Panasonic ............... 2021, 2022, 2109, 2125, 2126, 2127
Pentax ................................ 2016, 2055, 2056, 2107, 2120
Pentex Research .......................................................... 2018
Philco ........................................... 2021, 2022, 2062, 2063
Philips .......................................... 2021, 2062, 2096, 2124

Summary of Contents for D52W15

































Reviews: