Connecting a camcorder
You can use your TV’s front panel jacks to connect a camcorder,
which enables you to view camcorder tapes without a VCR.
✓
The audio and video cables mentioned in the steps below are usually included with
a camcorder. You can also purchase them at your local electronics store.
1
Locate the camcorder’s A/V output jacks on the camcorder.
2
Connect an audio cable to the camcorder’s AUDIO OUT terminal.
3
Connect the other end of the cable to the AUDIO IN terminal on the
front panel of your TV .
4
Connect a video cable to the camcorder’s VIDEO OUT terminal.
5
Connect the other end of the cable to the VIDEO IN terminal on the
front panel of your TV.
Installing batteries in the remote control
1
Pull the cover completely off the back of your remote control.
2
Install two AA size batteries. Make sure to match the + and
– ends of the batteries with the diagram inside the compartment.
3
Replace the lid.
✓
Remove the batteries and store them in a cool, dry place if you won’t be using the
remote control for a long time.
✓
The remote control can be used up to about 23 feet from the TV.
✓
Batteries last for about one year.
9
C
HAPTER
T
WO
: I
NSTALLATION
I
NSTALLATION
1
2
3
4
5
1
2
3
Camcorder
Output Jacks
VIDEO
AUDIO
OUTPUT
Audio Cable
VIDEO
AUDIO
OUTPUT
Camcorder
Output Jacks
Video Cable
VIDEO-IN-AUDIO
VIDEO
AUDIO
OUTPUT
Camcorder
Output Jacks
Audio Cable
VIDEO-IN-AUDIO
VIDEO
AUDIO
OUTPUT
Camcorder
Output Jacks
Video Cable
