RCA BRM300DU Instruction Manual Download Page 17

Page: 17 / 60

BRM300D

Professional Digital Two-Way Mobile Radio Instruction Manual

Sent Successfully -

The text message

is sent successfully.

Send Failed -

The text message cannot

be sent.

In-Progress -

The text message to a

group alias or ID is pending transmission.

Audio Tones

Alert tones provide you with audible
indications of the radio’s status or the radio’s
response to data received.

Continuous Tone

- A monotone sound.

Sounds continuously until termination.

Periodic Tone

- Sounds periodically

depending on the duration set by the radio.

Repetitive Tone

- A single tone that repeats

itself until it is terminated by the user.

Momentary Tone

- Sounds only once for a

short period of time defined by the radio.

Receiving a Call

If CTCSS/CDCSS, 2-Tone, MDC1200 is set on
the current channel by your RCA dealer, you
can only receive calls with matched signaling. If
CTCSS/CDCSS, 2-Tone, MDC1200 is not set, you
can hear all users on the channel selected.

Transmitting a Call

To transmit a call:
1. Hold the microphone about 2” from your

mouth when speaking and press the [

PTT

]

(push to talk) button. (Figure 12) The red LED
lights during call.

2. Release [

PTT

] to return to the receive/listen

(RX) mode.

Figure 12

PTT (Push to
talk) button

Making and Receiving Calls

Summary of Contents for BRM300DU





























































Search results

Summary of Contents for BRM300DU

Reviews:

Related manuals for BRM300DU

Brands by name

Popular brands

RCA BRM300DU, Instruction Manual

Search results

Summary of Contents for BRM300DU

Reviews:

Related manuals for BRM300DU

Brands by name

Popular brands