manualshive.com logo in svg

RCA BR850U, Instruction Manual

Share
Download
RCA BR850U Instruction Manual Download Page 19

Copyright © 2012 Discount Two-Way Radio Corporation - North American Distributor

BR850

TM

 Professional Two-Way Radio Instruction Manual

18

  

•   After  the  battery  is  placed  properly,  the 

LED solidly glows red indicating the battery 
is  charging,  or  flashes  indicating  that 
the  battery  is  damaged  or  the  ambient 
temperature is over high/low.

Steps for setting up your charger:

1.  Plug the power cord into the adapter. 
2.  Plug the AC connector of the adapter into 

the AC outlet socket.

3.  Plug the DC connector of the adapter into 

the DC socket on the back of the charger. 

4.  Place the radio with the battery attached, 

or the battery alone, in the charger.  

5.  Make  sure  the  battery  is  in  well  contact 

with the charging terminals. The charging 
process initiates when the red LED lights. 

6.  The  greed  LED  lights  about  3  hours  later 

indicating the battery is fully charged. Then 
remove the radio with the battery attached 
or the battery alone from the charger.

Notes:

•   It  is  normal  that  the  charger  LED  flashes 

before inserting battery into the charger.

•   Do not change the battery in the charger 

until the charger LED is stabilized. 

Summary of Contents for BR850U
















































Reviews:

No comments

Brands by name

Popular brands

Load more brands