background image

6

Most TVs have a channel scan option in their menu system, many times in a SETUP or CHANNEL menu 
under ANTENNA. For detailed instructions on performing a channel scan, see the owner’s manual that came 
with your TV.

Note: If you move the switch on the amplifier or change the position of the antenna, you should scan for 
channels again.

FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause 
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired 
operation.
This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment 
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning 
the radio or television off and on, the user is encouraged to try to correct interference by one or more of the following measures: 
•  Reorient or relocate the receiving antenna. 
•  Increase the separation between the equipment and receiver. 
•  Connect the equipment into an outlet on another circuit. 
•  Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority 
to operate this equipment.
Industry Canada Regulatory Information
CAN ICES-3 (B)/NMB-3 (B)
Avis d’Industrie Canada
CAN ICES-3 (B)/NMB-3 (B)

Scan for channels on your TV

4

MENU

Setup

Channel

Language

Channel Search...

12 Month Limited Warranty 

Voxx Accessories Corporation (the “Company”) warrants to the original retail purchaser of this product that should this product or any 
part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of 
original purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Company’s option) without 
charge for parts and repair labor. To obtain repair or replacement within the terms of the warranty, the product is to be delivered with 
proof of warranty coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to an approved warranty station. 
For the location of the nearest warranty station to you, call toll-free to our control office: 1-800-645-4994.

This Warranty is not transferable and does not cover product purchased, serviced or used outside the United States or Canada. The 
Warranty does not extend to the elimination of externally generated static or noise. This Warranty does not apply to costs incurred for 
installation, removal or reinstallation of the product, or, if in the Company’s opinion, the product has been damaged through acts of 
nature, alteration, improper installation, mishandling, misuse, neglect, or accident. This Warranty does not cover damage caused by an 
AC adapter not provided with the product.

THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE 
AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. This 
Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO DURATION OF THIS WARRANTY. ANY ACTION 
FOR BREACH OF ANY WARRANTY HEREUNDER, INCLUDING ANY IMPLIED WARRANTY, MUST BE BROUGHT WITHIN A PERIOD OF 24 
MONTHS FROM THE DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR 
INCIDENTAL DAMAGES WHATSOEVER. No person or representative is authorized to assume for the Company any liability other than 
expressed herein in connection with the sale of this product.

Some states/provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or 
consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and 
you may also have other rights which vary from state/province to state/province.

Summary of Contents for ANT860E IB 01













Reviews: