44 / 54
exit factory menu
：
press EXIT key.
enter the secondary Menu of factory menu
：
use direction key to select the option that going
to enter
，
press
“
ok
”
.
exit the secondary Menu of factory menu
：
press
“
EXIT
”
key go back to homepage of factory
menu.
White Balance：白平衡调节，
输入：选择信号输入通道（USB 通道不可选）
Enter: choose signal channel (USB channel is
unavailable)
TEMPERATURE：选择色温模式，暖和，正常，冷艳
Choose colour temperature: warm ,standard, cold
R-GAIN,G-GAIN,B-GAIN：亮场色温调节
adjust the colour temperature of bright field
R-OFFSET,G-OFFSET,B-OFFSE：暗场色温调节
adjust the colour temperature of dark field
拷贝到其他输入：此项无需操作
Copy to other access: this option needn’t operate
ADC Adjust：ADC 模数转换调节,
Inpur Source:选择输入信号的类型，
choose the type of
input signal
YPBPR(HD).YPBPR(SD)
RGB
R-GAIN,G-GAIN,B-GAIN：亮场调节
(adjust bright field)
R-OFFSET,G-OFFSET,B-OFFSE：暗场调节
(adjust bright
field)
AUTO ADC:自动 ADC 数模转换调节。
Non_linear ：图像、声音曲线调节
曲线设置:NLVolume1, NLVolume25, NLVolume50,
NLVolume75, NLVolume100,分别对应音量是 0,25%,
50%,75%,100%时的数值
Curve setting: NLVolume1, NLVolume25, NLVolume50,
NLVolume75, NLVolume100 correspond to the volume
at 0,25%,50%,75%,100%
褒机
在 OFF,White,红,绿,蓝,Black 中切换
Change between off
，
white
，
red
，
green
，
bule
。
OverScan:图像重显率调节
Input Source:输入信号
Horizontal Pos 调整图象水平位置
Vertical Pos：调整图象垂直位置
Up Crop, Down Crop:调整垂直重显率
Left Crop,Right Crop :调节水平重显率
Summary of Contents for 55AN3D
Page 1: ...RCA 55AN3D Downloaded from DTForuM ...
Page 29: ...28 54 图 1 图 2 ...
