Call Waiting Caller ID
This feature allows you to see who is calling when you hear the call waiting beep. The caller
identification information appears in the display after you hear the tone.
• Press the FLASH button to put the person to whom you’re talking on hold and answer the
incoming call.
IMPORTANT: To use all the features of this unit, you must subscribe to either the standard
Name/Number Caller ID Service or Caller ID with Call Waiting Service. To know who is calling
while you are on the phone, you must subscribe to Caller ID with Call Waiting Service.
Phone Book (Directory) Memory
You may store data in the Phone Book Directory. The Phone Book stores up to 16 characters
and 32 digits.
The records are stored by alphabetically ascending order.
Adding Phone Book Entries
1. Make sure the phone is in standby mode (not in talk mode).
2. Press the Memory soft key and then press the DIR soft key to enter Phone book review
mode.
3. Use VOL (- or +) button to scroll through the call records.
4. Press the Option soft key, use VOL (- or +) to select New.
5. Press the Select soft key, Enter name shows in the display.
6. Input a name. Please refer to section “Handset Name” for name editing method.
NOTE: A name must be input otherwise the record cannot be stored.
7. Press the Save soft key, Enter number shows in the display.
8. Edit the numbers with the dial pad.
9. Press the Save soft key to enter VIP Tone Melody selection.
10. Use the VOL (- or +) button to scroll to the desired melody.
11. Press Select soft key, and you will hear a confirmation tone.
Reviewing Phone Book Records
1. Make sure the phone is in standby mode (not in talk mode).
2. Press the Memory soft key and then press the DIR soft key to enter Phone book review
mode.
3. Use VOL (- or +) button to scroll through the call records.
-OR-
Press the number keys to go to the name of the records started with the corresponding
character.
Editing a Phone Book Record
1. When reviewing the phone book records, use the VOL (- or +) button or the number keys
to scroll to the desired record.
2. Press the Option soft key, use VOL (- or +) to select Edit, then press the Select soft key to
24
