11
4. Insert the battery pack.
5. Close the battery compartment by pushing the door up until it snaps into
place.
Handset Charging Cradle
1. Plug the AC power converter of the charging cradle into the electrical
outlet.
CAUTION: To reduce risk of personal injury, fire, or damage use
only the power adaptor (Manufacturer: ESL, Type: IA5060, 120Vac/
6Vdc/500mA; Manufacturer: NanTong DaMing, Type: DM-SC060058,
120Vac/6Vdc/0-0.58A) listed in the user’s guide. This power adaptor
is intended to be correctly orientated in a vertical or floor mount
position.
2. Place the handset in the charging cradle. The charge indicator turns on,
verifying the battery is charging.
3. Allow the phone to charge for 16 hours prior to first use.
Programming the Telephone
Initial Setup
1. Make sure your phone is
OFF
(not in TALK mode).
2. Press the
mute/menu OK
button to go to the main menu.
3. Press
caller ID-volume (
or
) button to scroll to
INITIAL SETUP
.
4
. Press the
mute/menu OK
button to confirm and you may program the
following items:
Handset Name, Registration, Deregistration, and Global De-registration.
NOTE: During programming, you may press the END /EXIT button at
any time to exit the sub-menu and return to the menu.
Handset Name
From the Initial Setup Menu:
1. Press the
caller ID-volume
(
or
) button to scroll to the
HANDSET
NAME
sub-menu.
2. Press
mute/menu OK
button to enter the menu. The screen displays
HANDSET NAME
.
3.
Use the touch-tone pad to enter a name (up to 15 characters). More than
one letter is stored in each of the number keys. For example, to enter Bill
Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for the
letter I. Press the 5 key 3 times for the letter L. Press the 5 key 3 times for
the second letter L, and press the 1 key to insert a space between the first
and last name. Press the 7 key 4 times for the letter S; press the 6 key once
Summary of Contents for 2110
Page 8: ...8 Base Layout ...