20
CALL
Press
DISPLAY/CALL
to display the
current informations on the screen.
Press
DISPLAY/CALL
again to clear
the call display.
C/–
Press and release
CH
+
or
–
. The
channel automatically stops at the
next channel set into memory.
For proper operation, before select-
ing channels, they should be set into
the memory. See pages 22 and 23
“Memorizing channels”.
QUICK VIEW
This button allows you to go back to
the last channel selected by press-
ing
QUICK VIEW
. Press
QUICK
VIEW
again to return to the last
channel you were watching.
SLEEP
To set the TV/VCR/DVD to turn off
after a preset amount of time, press
SLEEP
on the remote control. The
clock will count down 10 minutes for
each press of
SLEEP
(120, 110,
...10, 0). After the sleep time is
programmed, the display will appear
briefly every ten minutes to remind you that the sleep timer is
operating. To confirm the sleep timer setting, press
SLEEP
and the
remaining time will be displayed for a few seconds. To cancel the
sleep timer, press
SLEEP
repeatedly until the display turns to 0.
SLEEP
120
• Channel number or VIDEO mode.
• Stereo or SAP (second audio
program) audio status.
• Audio output status.
Press
MUTE
to switch off the sound.
The unit’s sound will be silenced and
“MUTE” will briefly appear on the
screen. The sound can be switched
back on by pressing this button
again or one of
VOL
+
or
–
.
MUTE
MUTE
NOTE:
To listen through the headphones,
insert the headphones (not supplied)
with a 1/8" mini plug into PHONES
jack on the front. The sound from the
TV speaker is muted.
CH 125
8 : 47
AM
MON
TV/VCR
00 : 00 : 00 SP
STEREO SAP
TV operation
(continued)
5P70101B [E] (18-21)
10/19/04, 9:31 AM
20
