RCA - 1997 TOCOM 15270640 User Manual Download

Page: 62 / 88

Reference

Controls and Buttons

This part of the Reference sections discusses the controls and
buttons located on the receiver and the remote control.

Front Panel Controls

ON/OFF

Turns the DSS

receiver’s power on or off.

INFO

Brings up the on-screen channel banner.

ANTENNA

Switches the source of the video signal from

satellite signals to an off-air antenna or cable signal.

ARROWS

Press the navigation arrows to move the on-screen

highlight up, down, left, or right. Using the arrows to highlight a
menu item is also called “pointing.” The up and down arrows
also change channels.

MENU•SELECT

Brings up the Main menu. If you are already in

the menu system, press MENU•SELECT to select a highlighted
choice.

ACCESS CARD

Identifies you to your program providers. The

DSS

system requires a valid access card.

The Access Card door slides open so that you can replace the card when necessary.

ON/OFF

INFO

ANTENNA

SELECT

Summary of Contents for - 1997 TOCOM 15270640

























































































Search results

Summary of Contents for - 1997 TOCOM 15270640

Reviews:

Related manuals for - 1997 TOCOM 15270640

Brands by name

Popular brands

RCA - 1997 TOCOM 15270640, User Manual

Search results

Summary of Contents for - 1997 TOCOM 15270640

Reviews:

Related manuals for - 1997 TOCOM 15270640

Brands by name

Popular brands