100-0114
Step 8.
Step 7.
Step 6.
Step 5.
To install a new battery, pull the currently installed
battery out.
*Note: CR2025 3V Lithium Battery.
Reinstall the rear case and install the two screws
with the Phillips screw driver.
When installing the new batteries, make sure they
are in the proper configuration. Positive facing up,
and negative facing down.
Install the battery by pushing it into the circuit board,
making sure to not use too much force.
4
Wireless Warn Winch
Instruction Manual
100-0114
Step 4.
Step 3.
Step 2.
Step 1.
Use Phillips screwdriver to remove the screws.
Remove the case back.
Use some small force to remove the
battery box.
Wiggle the circuit board back and forth making
sure to keep it flat/horizontal with the case
front. This process is very important to raise
the electronic board just enough to remove the
battery. You do not need to fully remove the
circuit board.
3
Wireless Warn Winch
Instruction Manual
150-0352
150-0352
+
-
+
+
150-0352
150-0352
